tile adhesive
See larger image: tile adhesive
Product Details
Apply:adhering tile,marble,grantie,stones and etc.
MOQ:20ton
N/W:25kg/bag
adjust time(min)≥ | 5 |
laying time(min)≥ | 10 |
dry time | About 2h |
Performance:
The product is a new modified polymer tile adhensive, no poison and protect the envirnment.
Excellent ability of anti-sagging, and easy to operate.
High adhensiveness on the wall and the tile, air-tightness and waterproofing .
Apply directly on the thin bed, easy to operate and save time.
application:
The tile adhensive applicates for adhering various types of tiles,marble, granite,stones and etc. refer the chart:
pattern | application range |
1 | formulated for cement based adhensive ,avalible for fixing small ceramic floors or wall tiles or mosaics on the internal&external wall. |
2 | applicate for fixing some bigger ceramin floors, mable, granite,various stones and repairing other old floors. |
3 | Applicate fixing and adhering the lage tiles and stones. |
Our company supply the masterbatch of various pattern . We would supply the specific descripsion according the situation of the celint.
usage:
1 Mix ratio: powder :water =31
2 Pour the powder into water ,stirring the mixture with the electric mixer until it is equal, no block and creamy ,then allow the mixture stand of 2-3min, better to stir it again.
3 Apply the mortar on the required substrate with trowel, plaster 1 m² per time, then squeeze the tiles on it.
4 If the back joint is deep ,it is better to apply both the front and behind surfaces to ensure the strong adhension.
storeage and package:
25kg/pack , store at the dry and ventilation places, the shelf life is 6 months.
precaution:
1 Better to use at the tempreture 5ºC - 40ºC ,not to mix the dry block mortar with water.
2 Ensure the vertical and evenness of the base substrate,grouting or enter should be started only after at least 24hours after the tiles are fixed.
3 If the tempreture of the substrate is high(40 ºC), water the substrate to keep wet to prevent the the mortar losing water fast.
4 Choose the proper grouting agent for the gap between the blocks.
5Clean all the surface of tiles lightly using a wet sponge or cloth before adhensive cures .
6 Clean the substrate and tiles, remove the dust ,oil point and other dirty points, the loose part of the old surface must be leveled.
Related Products
