Testing Equipment (brake tester,side slip tester,suspension tester)

Measurement parameters: brake performance, side slip, suspension, axle load
Measurement range: 3t
Dimensions: (L*W*H)
1) brake tester: 2500mmX750mmX350mm

2) suspension tester: 2500mmX550mmX350mm
3) sideslip tester: 800mmX460mmX50mm

Technical Parameters:
Power supply: 12kW
Voltage supply: 380V 50Hz
Dynamic zero error: ± 0.6%
Zero drift: ± 0.1%
Repeated error: ≤0.1%
Static differences between indications value: ≤2.0%
Air pressure: ≤8MPa
Side slip measure scope: : ± 15mm;
Brake force measure scope: 0 - 9000N
Test Speed: 2.5Km/h
Suspension testing frequency: 23Hz
Brake tester diameter: 245mm

Brake tester roller length:750mm
Difference between the height of Brake roller: 25mm
Adhesion coefficient: 0.8

The Function Features
1. WINDOWS XP operating system, easy and convenient
2. Pentium 3 industrial computer control, safe and stable
3. State brand sensor, accurate
4. Industrial specific software, vivid and simple5. Curve record, directly
6. Bold words display, clearly
7. Comparison the sequence with the international standard ensure the users know the testing result clearly
8. Curve diagram printout
9. Simple data operating system, manage the tested car easily
10. Auto lock of the brake, convenient
11. Relax function of the sideslip, precise
12. Single axle suspension function, less noise
13. Four point axle load function, less error, more precise
14. High and low roller design ensure the car stay on the inspection bench
15. Brake plate has a protect function of stop to prevent tyres abrasion
16. Covers satisfied different installation requirements
17. Supporting any single measurement to meet specific need
18. Performs test after test automatically without operator even touching keyboard
19. Calibration linearization diagram, indicating sensors working directly
20. Speedometer with air cell lift, convenient to use the car
LED optional