Mobile Phone Charger

(Item number: FB-UC-001S)

Parameter:

Input: AC 100V-240 V, 50/60 Hz

Output: DC 2.8~8.7 V, 150~250mA/h

Use Enviroment temperature:0-40 C

Suitable for battery of 200-3000 mAh;

Characteristic:

The charger adopt the advanced switching power supply which with high efficient,

and adopt the advanced control chip circuit, can check the battery & stop charge automatic when finishing charge,can protect battery better.

Instruction :

1. Fix the battery:

First adjust the Charger hardware connector space according to the  distance of battery positive pole plate and negative pole plate, make sure the battery and hardware connector in correct connection , if  the CON is ON, it is OK ,Otherwise , Press the changed switch Button, then the CON is ON, it means connection is ok.

2.Charge confirmation:

After connected with the battery well, please put the charger to the 100-240 V AC power source, it indicating charge when the LED CH is flash.

Finish charge:

When the CH is OFF completely, the FULL become bright, it mean finished charge ,it can be take off for use.

Notice:

1.Indoor use only, please use the firm AC power source jack;

2.Avoid the high temperature, heat and direct sunshine when work;

3.Please cut off the AC power source when not use,

4.For the rechargeable battery use only, forbidden to use for  UN-rechargeable battery