Product Introduction

Ø         Original and advanced technology of IGBT inverter, high reliability, high power efficiency, energy save, light and small size.

Ø         Contact /non-contact cutting modes.

Ø         Good external characteristic, the electrode wears slowly.

Ø         The cutting current could be adjusted continuously. Make the lancing narrow, flat and smooth.

Ø         Automatic compensation for voltage hunting between more or less 15%. Keeping the output stable.

Ø         Automatic compensation for output cable length from 3M to 100M.

Ø         Protection circuit against over heat, over current, over voltage, low current, low voltage and default phases inside.

Ø         Lower cost and higher working efficiency than gas torch cutting. For example, the cutting rate is 4 times and the cost is only one third of gas torch cutting when cuts the steel plate of 12mm thickness.

Ø         Being suitable for cutting of low carbon steel, low alloy steel, stainless steel, titanium, aluminum, copper and alloy.

Ø         Special processing keep the welding machine from dust, water and moistness. for the welding in outdoor and severe working environment.

Ø         Cooling water pipe union.

Ø         long duty cycle, performance stable, safe and reliable, less interfere to power grid and outside equipments, Save the consumables, Support automatic digital control cutting systems.

Standard parts of a whole cutting machine

Power unit                1 piece

Input power cable      1piece

Ground cable             1piece

Cutting torch           1piece

Ground clamp            1 piece