New products-Robot grass cutter,mowing machine, automatic mower

Technical Specifications

1) Fully-automatic grass mowing by microcomputer processor

2) Drive insects away by ultrasonic radar

3) Intelligent moving function

    Intelligently adjust moving speed according to lawn density, namely reduce moving speed in the areas with dense grass and increase moving speed in the areas with sparse grass and spiraling outwards in the areas with very dense grass. In such a way, the service lifetime of grass mowing electric motor and batteries can be ensured, furthermore, grass mowing efficiency can be increased and the service lifetime of machine electric circuits can be greatly extended.  

4) Collision sensor

    There are collision sensors in front of the IMOWER.When it hits any obstacles, such as a tree or rock, it just reverses safely and selects a new direction before continuing

5) Rain sensors

   When it gets raining, it will find its own way back to the charging station.

6) Automatic charging

IMOWER returns to the charging station when it senses its battery is almost empty. After being charged, it can continue operation according to preset procedure. It will stops in the charging station after it worked for three times and finished the third time charging. If you want it to continue working, you have to start it again.

7) Cutting height adjustment

    The cutting height is easily adjusted by turning the knob at the top of the mower, no need to

touching the wet grassy mowing parts.

8) Blade safety control

    When people or animal comes closer, IMOWER can automatically stops the blade, and reverses safely and then turn to another direction. The blade will also stop as soon as it was lift up from the ground by any sides.

9) Remote control

    Realize startup/closedown of the mower, control the direction, force it to go back to the    charging station etc by means of the instruction of remote controller.

10) Theft protection systems

     The mower has Dual-boot function. It could not be started without the remote control. The buzzer in the machine will alarm suppose it was forced taken away by unauthorized person when it was working or charging.

11) Charging base contains electronic fence 

      Before IMOWER can get to work, you will need to simply staple a electronic fence wire to the perimeter of the lawn. This wire can be sensed by the mower and will ensure that only this area of grass is cut. Once the wire has no power, IMOWER will stop at once, this can prevent it leaving the assigned range.