Instructions:

Before installing the unit,pull out the webbing form the retractor must be held perependiculary to the ground.

Fix the retractor to the proper point of the floor and then fix the loop guide to the pillar anchor point.Do not remove the cardboard stopper before fixing the retractor and pillar loop guide.

Trouble Shooting:

If  you find the retractor does not work,hold it vertically to the ground and pull the webbing slowly after retracting a little with hand.

Caution:

Do not remove the spring cover in any case.Removing spring cover(thinner side of plastic cover)gives not only irretrievable damage to the retractor but also harm.