220~240V AC Heat Alarm or Detector (Patented), battery back up

CE, ROHS, REACH compliance

GNS-1263S Heat Alarm is intended to be supplementary to Smoke Alarms and should only be placed in areas where smoke alarms cannot be used. This heat alarm is a multiple station heat alarm and can be connected to other alarms of the same make and type. This interconnect feature allows up to 40 Heat Alarms and / or Smoke Alarms to be connected together over 150m maximum, using the single white wire, and thus allowing all alarms to sound when any one is activated.           

GNS-1263S Heat alarm gives a fire warning when the temperature at the unit reaches 60ºC (+/-5ºC). It is ideal for kitchens, garages, cellars, boiler rooms, attics and other areas where there are normally high levels of fumes, smoke or dust which preclude the use of Smoke Alarms due to the risk of false alarms.

All the Heat Alarms and Smoke Alarms should be interconnected to ensure the early warning will be heard, particularly by somebody sleeping. A properly designed early warning fire system ensures the alarm is given before the escape routes become blocked with smoke. Therefore there must be Smoke Alarms along the escape routes as Heat Alarms would not give sufficient warning. However, a fire in a closed room (e.g. kitchen) adjoining the escape route, can eventually cause the corridor to become smoke-logged due to smoke leaking out from around the door before adequate warning can be given by detectors in the corridor. A heat Alarm in the closed room may give early warning of fire in that room.                   

• Ideal for kitchen
• Sound Level: > 85dB in 3 metre
• Interconnectable with Garvan AC smoke & heat alarm up to 40 pcs to increase protection. An alarm on one detector will trigger all other interconnected alarms (only the triggered alarm will flash a red indicator)
• AC Power Indicator -- Indicator light shines continuously under normal conditions to let you know the alarm is receiving AC power.
• 9V Battery Back-Up -- Power failures don't stop AC heat alarms with battery back-up. Heat alarm goes on working even if the household power fails.
• Low battery warning - Remind the users to replace the battery when battery end of life.
• Easy to install with new "Quick" mount base
• Hush (Silence) Feature - Allows the users to quickly silence nuisance alarms
• High stability & reliability
• Missing Battery Stopper - An extra measure of safety! Cannot mount the heat alarm without the battery installed.