The main technology of shot blaster adopts DISA Technology and PANBORN Technology .

ZPX600

Horizontal Movable Shot Blast Machine

The series has the advantages of high-strength machine body ,long service life  and large rate abrasive flow.

Working width: 600mm

Blasting capacity: up to 400m²/h on concrete, up to 50m²/h on steel plate

Working areas: Large Horizontal Surfaces (production or factories halls, car parks, warehouses,steel bridges, airport runways, highways)

Wheel power: 15kW twin motors

Scope of supply: Shot blaster 2-20DT / dust

collector BDC-655 or BDC-854 / Users

manual

Options: 20m suction hose 150 mm / Steel

abrasive / Magnetic broom 800mm /

Maintenance kit

Please contact your Blastrac Expert for more details

1 Closed circuit, dust free, when connected to an appropriate dust collector BDC-655, BDC-854

2 Very performing recycling system

3 Powerful machine equipped with 2 twin motors 11kW

4 Reinforced shaft

5 Ergonomic design and users friendly control panel

6 Heavy duty professional machine, ideal for surface preparation specialists

7 Very efficient on all types of floors

8 High performances but human size machine

9 Increased productivity, reduced maintenance costs

10 Abrasive consumption < 100 gr/m²

11 Floor Preparation / Renovation / Maintenance.

The portable shot blast cleaning machine is environment-friendly and has a low cost. It adopted the walk-behind shot blasting system.The walk-behind shot blasting systems use a high performance, airless, centrifugal wheel for propelling blast media at a high velocity to the concrete and steel surface to clean it .The portable shot cleaning machine is devided into two sorts :the horizontal machine and the vertical machine .Wheather it be a horizontal or vertical machine ,it can be quickly dissembled and fixed in only 20 minutes.

Horizontal Machines - are mainly used to remove paint,pitch and floating oil and clean highways, airport runways, ship board,oil tank and bridges and other large asphalt surfaces.It is electrically-powered,self-propelled and offers variable travel speed control to provide a consistent blast pattern.

The concrete dust is recovered by a powerful dust collection system. The dust collector removes pulverized abrasive, dust and contaminants. Very little abrasive is lost and the usable media is returned to the storage hopper for recirculation by the blast wheel. Vertical Machines - are designed to clean oil tanks,ship hulls and repair water tanks,also to clean both sides of spherical objects and the roof of dome buildings. In the vertical mode,a Hoist System, mounted on a powered Fixture at the top of the structure being cleaned,raises and lowers the Blast Module as the module and fixture traverse horizontally.The operator controls the machine movement, hoist operation, and blast functions from the hand-held Wireless Remote Control,thus making it possible to automatically recycle the abrasive media and non-stop feed.It is very convenient because only one worker is enough to control the operation.It saved labor and enhanced productivity. The abrasive media is contained,circulated, and cleaned within the Blast Module. A vacuum hose with a drum automatically deposits the paint and dust and easily disposes wastes.The shot cleaning greatly lowerd the cost to only several cents cost per square meter.

Closed circuit blast machines are world renowned as an effective method of surface preparation for both horizontal and vertical surfaces constructed from concrete, stone, asphalt or steel.

The abrasive media removes coatings, dirt, concrete laitance,rust from steel and also leaves the substrate prepared to accept a replacement finish.

The substrate will have the perfect anchor profile to guarantee excellent adhesion of the finish being applied which minimizes the possibility of this to fail or debond.

This factor is particularly important on steel were specific standards are required prior to painting and closed circuit machines can achieve an SA 2.5/3 with a profile to suit any coating.

The Principle:

Closed circuit machines throw the abrasive media by centrifugal force and the media is recycled with the machine and dust and contaminants are removed by an air wash separator and these are removed to a dedicated dust collector which makes the process almost dust-free in operation. Because the media is recycled the consumption is minimised and compared to open blasting a fraction of the media is used which reduces the cost of media and disposal of spent media.

The dedicated dust collector uses highly efficient filter cartridges to minimise any dust passing back into free air and the dust and contamination are deposited in a bin for easy disposal.

Closed circuit blast machines offer the perfect solution to highly efficient surface preparation and production rates.

The Range

We offer you a large Selection of equipment, ranging from handheld model 1-5HH to the big 2-45D in either remotely controlled version or truck-mounted, plus 11 intermediate models!

Our target: offering you the most adapted equipment for your specific need, jobsite, and application, with blasting widths from 125 mm to 1.150 mm and output from 10 to 3.600 m² on concrete and from 10 to 200 m² on steel.

Shot blasting is the Professionals preferred solution:

1 To regenerate grip and improve safety on roads

2 To remove old coatings, rubbers on airports

3 To remove marking on roads, highways, runways, industrial floors

4 To clean and prepare surfaces before applying a coating / paint / resin / tiles

All our shot blasters are dust free, since connected to a specific professional dust collector.