Handheld BT GPS Receivers, combines the advanced Bluetooth
 technology and GPS technology. Through, Bluetooth technology, you
 can receive GPS data through intelligent mobile phone, PDA, laptop
 and desktop for location and navigation.

 Bluetooth GPS Receiver send data relating to current location and movement information
 to the navigation software of intelligent mobile or PDA through Bluetooth
 technology and assists the navigation software to navigate and track.

1.Very low electricity cost and work up to maximum 20 hours
2.High-sense, good-performance GPS chip, receiving 16 satellites simultaneously
3.Accord with Bluetooth 1.2 Specification CLASS 2
4.Support Bluetooth serial communication Profile (SPP Profile)
5.Compatible with li-battery and charger of Nokia mobile (e.g.N70)
6.3 LED indicate statues of Bluetooth, GPS and recharging
7.Support the baud rate 9600bps in NMEA-0183 standard
8.Small-size, humanized design, portable, cute appearance

General Index
Receivable frequency               L1,1575.42MHZ
C/A code                        1.023MHZ
Channel                         16
Sensibility
Search                           -147dBm
Track                            -152dBm
Precision
Location                           7m CEP 90,3m CEP 50SA off
Speed                             0.1 m/s
Location time
Hot startup                         12s, average
Warm startup                       38s, average
Cold startup                        60s, average
Dynamic condition
Altitude max.                       10 km
Horizontal speed                     515m/s
Acceleration                        Max. 4g
GPS protocol
NMEA-0183 ASIC protocol
Default NMEA GGA,  GSA,GSV and RMC,(VTG,GLL and RMS optional)
9600bps baud rate,8 data bits,1 stop bit,no check bit
Bluetooth index
Bluetooth code                        V1.2
Emission power                       Class 2 (4dBm max)
Receiving sensibility                   -80dBm(Bit error rate less than 0.1)
Communication distance                10m typical (free space)
Profile Communication Profile            Serial Port Profile (SPP)
Power consumption
Working current                        45mA typical
Working voltage                        3.7V
Chargeable voltage                      5.7V
Battery
Recharge time                         2.5hrs typical
Working time                         About 20hr, track after the charging is full
Environment
Working temperature                    -10 to +60
Storage temperature                     -20 to +85
II Hardware Features
1. Size: 72.8(L)x45.8(W)x18.8(H)mm
 
2. Packing list
a. Main unit  1
b. Chargeable li-battery 1
c. Users manual  1(or 1 CD)
d. Home charger 1
e. Car charger 1
Main unit         Battery    CD of instruction   Charger   Car charger
3. Description
Blue LED, indicates the working status of bluetooth
Green LED, indicating the working status of GPS
Red LED, indicating the working status of charging            
Switch for power supply, Left for ON, Right for OFF
Power extension                                                         
4. LED status
LED
Status
Description
Green LED  On indicates GPS position no fixed
 Fast flash   indicates GPS position fixed
Blue LED Fast flash indicates Bluetooth in stand-by mode
Slow flash  indicates Bluetooth in connection
Red LED Constant on Indicates : it is under charging
Off Charging is completed