Round IDE Ultra 133/100/66 cable Parallel ATA cable IDE CABLE sata cable sata drive cable
FC/ide/ata 80p*3female with 80 wires

Description:

1. Brief Introduction:

Parallel ATA (PATA) is an interface standard for the connection of storage devices such as hard disks, solid-state drives, and CD-ROM drives in computers. The standard is maintained by X3/INCITS committee [1]. It uses the underlying AT Attachment and AT Attachment Packet Interface (ATA/ATAPI) standards.

2. History

The current Parallel ATA standard is the result of a long history of incremental technical development. ATA/ATAPI is an evolution of the AT Attachment Interface, which was itself evolved in several stages from Western Digital's original Integrated Drive Electronics (IDE) interface. As a result, many near-synonyms for ATA/ATAPI and its previous incarnations exist, including abbreviations such as IDE which are still in common informal use. After the market introduction of Serial ATA in 2003, the original ATA was retroactively renamed Parallel ATA.

Parallel ATA only allows cable lengths up to 18 in (460 mm). Because of this length limit the technology normally appears as an internal computer storage interface. For many years ATA provided the most common and the least expensive interface for this application. By the beginning of 2007, it had largely been replaced by Serial ATA (SATA) in new systems.

1)   The full name of IDE is Integrated Device Electronics. It is a kind of hard disk Parallel cable. It is also called Parallel ATA after the use of serial ATA.

2)      The conductor is made of Ba with the PVC jacket shielded, and every pair of conductors is twisted in order to keep the signal to well transmitted and stable.

Some jackets are made of TPO. Of course, we will make different kinds of cables according to your needs.

3)      The cables are fit for the standards of UL.  

If you have any question, please feel free to contact me.

Contact: Alicia

Cellphone: 86-13981887593

Skyp..:  alicia999-smile