car seats cover features: Using advanced plush fabric carefully made from soft, delicate touch, very comfortable Wen Ai, in the winter to give you the warm feeling!

18 sets of components: the first set of pillowcases 4 + 6 + seat head restraints 2 + 2 + stall shoulder pad set 1 + 1 + hand brake cover tissue boxes 1 + 1 + steering wheel cover rearview mirror cover

product size:

the former back:72*60cm the former seat:60*56cm

after the back: 145*85cm  the rear seat:140*55cm

Installation Method:

1, the former back:

1, first unplug the head;

2, the back sets Presentation good;

3, the back cover on the front and back cover on the back of the bottom of the nap cloth stuffed back directly to the bottom of the back and the back felt the child stick;

4, and then inserted back after a good first sets Presentation;

5, will back order sets a good formation, the former back the installation is complete.

2: The former seat:

1, first seat sets Presentation at the seat and adjust the position of a good fit;

2, near the back part of the Department has surplus back directly along the slit stuffed behind and put a rope with a plastic buckle rubber band and pulled out; rope and the seat side of the rope properly tied, pull the seat from the front seat of Velcro pulled back through the plastic buckle will return and stick;

3, and then sets a good seat cover order formation, the former back the installation is complete.

3: After the back:

1, first unplug the head;

2, the backrest sets Presentation Good

3, the Velcro at the bottom of the front set back the rope stuffed with copies of the back, magic string from the following string to the back off the top of the plastic wrap after deduction stick, rope and the back side of the rope with each other properly tied;

4, will set a good back order formation, and then insert the head, back after the installation is complete. 

4: Rear seat:

1, recoil pull up the seat a little harder look at the entire seat can be directly reveal, then the installation is quite simple;

2, the seat sets Presentation at the seat and adjust the position of a good fit;

3, the back of the seat in front of Velcro pull back from the seat pulled through the plastic buckle will return and stick; and then tighten the back-end of the rope properly tied;

And then sets a good seat cover finishing flat rear seats of the installation is complete

2, near the back part of the Department has surplus back directly along the slit stuffed behind and put a rope with a plastic buckle rubber band and pulled out; rope and the seat side of the rope properly tied, pull the seat from the front seat of Velcro pulled back through the plastic buckle will return and stick;

3, and then sets a good seat cover order formation, the former back the installation is complete.