The Wireless GSM Alarm System G10E/EA adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any phones.




Wireless GSM Home Alarm System

Main Features

SUPPORT WIRED AND WIRELESS DETECTORS
Adapt wavecom double frequency GSM module.
9 wireless guarding zones
( 1 SOS alarm zone, 1 fire alarm zone, 1 external power failure alarm zone, the other 6 wireless guarding zones can be defined by user)
2 hardwire guarding zones.
Send SMS to 3 mobile phones automatically while alarming.
Call 3 phones automatically while alarming and drive wiretap.
Arm/disarm by wireless keyboard, remote controller, SMS or remote telephone/mobile phone.
Set the host by wireless keyboard, SMS or remote phone.
Report guarding zones remotely by SMS or voice.
Modify the name of wireless guarding zones and inquire the status of host by SMS demand.
With voice reminder while the host is working
Support two-way communication can be used as handfree telephone.
With standby rechargeable battery.
The alarm host automatically stores system status, while its power is off.
Connect with the alarm center through GSM network.

GSM Alarm System Home Package Include:

Main unit (control panel) -1 pcs
Wireless Smoke Sensor -1 pcs
Wireless Magnetic Door Sensor- 4 pcs
Wireless Remote Controls -2 pcs
Wireless Programming Keypad -1 pcs
Wireless PIR Motion Sensor -4 pcs
Indoor Siren -1 pcs
Power Supply- 1 pcs


(DIY option, each zones can add unlimited sensors)



Main Unit PARAMETER
GSM network frequency: 850/1900MHZ or 900/1800MHZ
External power failure alarm
Start-time: less than 1s
Alarm response time:
Less than 10s (GSM in normality)
Power requirements: AC 220V 50Hz
Standby battery: DC8.4V
Standby battery working hours: more than 10 hours
Working conditions
Operating temperature: 20 to 60
Humidity: 20% to 95%



Accessories PARAMETER

Wireless frequency: 315±0.2Mhz/433±0.2Mhz
Coding type: Jumping code
Remote controller: DC12V
Indoor siren: DC12V
Door/window magnetic contact: DC12V
PIR sensor: 3V (two 1.5v batteries inside)
Smoke detector: DC9v
Gas detector: DC9V
Shock sensor: DC12V (four 1.5v batteries inside)
Emergency button: DC12V