Blind rivets Knowledge(blind rivet,rivet)

The Standard Blind Break-Mandrel Rivet is comprised of two components, a rivet body and mandrel. The rivet is first placed into an installation tool, and is then inserted into the application or vice versa. Activating the tool pulls the rivet's mandrel drawing the mandrel head into the blind-end of the rivet body. This action forms an upset head on the rivet body and securely clamps the application   materials   together.

Finally the mandrel reaches its predetermined break- load, with the spent portion of the mandrel breaking away and being removed from the set rivet. Fast, easy-to-use blind rivets offer speed of assembly, consistent mechanical performance and excellent installed appearance, making blind riveting a reliable and economical assembly method.

Riveting sheets of different materials

Industrial Applications

Transportation/Automobile/Equipments

Buses, Cars, Trucks,Trailers, Refrigeration / Containers, Airplanes, Sea / Air Containers, Ships, Material handling equipments etc

Electrical - Electronics.

Computers, Telecom Equipments, Switching Equipments, Exchanges, Panels, Card Frames, Electronic Enclosures, Peripheral Terminal system devices, Cubicles, Lighting Equipments, any Sheet Metal Enclosures.

Consumer Electronics

Solar Systems, Medical Equipments, Washing Machines, Driers, Air- Conditioning Equipments, Elevators, Sign Boards, Steel Furniture, Various Tanks, Ovens, Kitchen Equipments and Systems. Kitchenware, Roofing, Dish Antennas, Industrial Ladders etc.

Guide to select a rivet

Strength
Select a Rivet based on strength required, corrosion resistance and materials to be joined.

Rivet material
The rivet material is decided on sheet materials to be joined
Aluminium : Medium strength generally used with aluminium sheets
All steel : this is used to join steel with steel sheets / plates.
All Stainless Steel : This is used to join stainless steel sheets or wherever corrosion resistance is required.

Rivet head
Rivet will bear on the sheet >> Dome Head.

Application requires flush surface >> Countersunk Head.

Rivet diameters
Dia selection again depends in strength requirements.

Rivet length
This is decided on Grip rage. (see datasheet)

Grip range
Total thickness of material to be joined is called grip Range.
This is an important factor as wrong Rivet length decided might effect the efficiency of joint.

Case study
A stainless steel fabrication calls for a joint strength of a
400 N - Shear and 700 N- Tensile, sheet thickness to be joined are 2 mm and 1 mm, Environment - Corrosive,
Preferred diameter is 3.2 mm (see datasheet).
Rivet to be used is stainless steel, Dome head,
rivet size is 3.2 x 6.85 mm

Note : Always use correct and recommended drill size for Rivet hole. Recommended riveting tool - Pneumatic tool. Hand tool can also be used.

Size range
General sizes 3.2 ,4.0, 4.8 dia in mm. Also available 2.4 and 6.4 diameter rivets
( Lengths available to join grip range from 1.00 mm to 22 mm).

Company: Jiexi Xili Fasteners Co., Ltd.

International sales department

Contact:Grant-Lian(Manager)

Phone:86-6635353862

Fax:86-6635354967

Mobile:86-13902759399