t5 light,t5 fluorescent,fluorescent light.daylighting,bring led

Wattage: 5W

Working Voltage: AC 100V-277V

Lumens: 300 lm  Central Lux: 40 Lux/3m  CRI80

Color Temperature:   Warm White 3000-3500K

                              Day White 6000-7000K

Dimensions: 1 foot length (30cm)

Lighting Angle: 160 degree

Life Hours: more than 5 years

LED Count: 60 LED's (SMD)

Ambient Temperature: - 20~45

Replaces: 15 watt T5 Fluorescent

                                         Why choose OSMIN's LED tube light?
Our Advantage:

Color temperature

Color temperature: Very near Philip light warm color for Y color coordination below 0.40, warm color 3100K-3300K, Day white 5800K-6300K.High CRI: Express the ability of the light, when it cover the object can show the really color of the object, Ra is morn than 80.

Lifespan

Guarantee: 30,000 hours continuous on power. 5years ordinary using depends on other electric equipments.The silicon rubber is better for transmit heat as well, so heat can easy go outside to the metal housing. This is another way to keep the components of the driver cool down, and make components work long life.

Driver

LED high power lighting has an obvious characteristic of constant current which is different the traditional lighting source.Our engineers adopt the constant current design of the switch power. Our led tube lighting can work in AC 85V to 265V. So the power has high stability.

First, we have the schema which must go through the test in form of our products; Second, the best schema can be introduced to us by many persons who want to be ours IC suppliers for our company is an big company, of course that any schema updated should complete after a certain test system follow the New schema verification list. Better schema design makes the current and voltage more stably and much higher works effectively, this make the components run in much low load, and much longer lifespan.

Our driver filled in the silicon rubber, this make the product more and safety. The silicon rubber has pass UL test and approved, it can stop the driver on fire once customers mistake operation. And stop the high current strike to the housing. This is the only design to be considered for current strike in LED tube light in the market.

Heat sink

LED light runs in very high effectively compare with other lights, but it can bring heat after all. The housing of LED light can be very hot when heat accumulating and the house has no a good heat sink design. The temperature of LED in our products must not below 60 which can prove LED runs in longevity. The temperature of some electronic components must be below 75,which can prove components run in longevity. There are two way to insure the low temperature, the first is the PCBA works in much higher effectively than other products in the market; The second is good heat sink housing design, which was made with special care. Firstly, the Die-casting craft. Secondly, machining carefully,which can enlarge the area of heat sink.

Our LED tube lighting use half metal and half PC as housing, the half metal is good for heat sink, which will make LED working under 60,work well and no decay.

Our driver filled in the silicon rubber, the silicon rubber is better for transmit heat as well, so heat can easy go outside to the metal housing. This is another way to keep the components of the driver cool down, and make components work long life.