Description of Liwang Disc Plough
    Disc plough produced by our company with the Brand name Liwang, as in conformity with the current agriculture conditions are being produced with 2-3-4-5 and 6 rows.The disc ploughs are produced to work in every type of soil by the basic principles such as soil breaking, soil raising, soil turning and soil mixing. LiWang disc ploughs are used to open the new fields and to process the stony areas. While processing, it avoids the occurance of the big holes and the upper part of furrows becoming muddy. There is no possibility to be stopped up with grass, helves and farm fertilizer. In addition, they can be used easily at rocky and rooted areas. Upon this feature, the damage that may occur in disc ploughs and tractor can be prevented.

Detailed specification of Liwang Disc Plough

1. The disc plough is directly mounted to the Tractors.

2. The plough is a hydraulically operated basic implement for the preparation of land.

3. It is available in a basic 2, 3, 4, 5- furrow version with the kit for converting ploughs  with even more furrows.

4. The Disc Plough is especially useful in hard and dry trashy, stumply land conditions and in soils where scouring is a major problem.

5. Heavy-duty frame has high trash clearance allowing the plough to operate   under heavy crop residual.

6. Being fully mounted and comparatively lighter in weight results lighter draft as compared to equivalent trailed plough where more power is required to operate and consequently higher operating costs 

More information about Disc Plough

The disc plough's advantages over the mouldboard plough are:

1. Only partial inversion of the soil so that plant residue is left on the surface, thus reducing the erosion risk and water losses by  evaporation.

2. Mixing action on loose soils.

3. Rolls over obstacles so that hardly any breakage occurs.

4. Lower risk of choking (sugarcane, cotton, maize).

5. Fewer problems with sticky soils.

6. Hardly any smearing of the furrow bottom (plough sole).

7. The wear is spread over the entire circumference of the disc (2m of cutting edge on discs with a diameter of 65cm).

8. The discs are selfsharpening.

9. Easier adjustment.