GF-D High Speed Aluminum Foil Laminating Machine

 High Speed Aluminum Foil Laminating Machine GFD

Application and Features:

The aluminum foil laminating machine is applied to laminating various roll materials, such as plastic film, PE( 25-150um),paper(30-150um), and aluminum foil(7-3um), etc, in two-layer or multi-layer manner.

This aluminum foil laminating machine adopts Siemens PLC control system, Japanese YASKAWA frequency converter, tension closed-loop control system, roller stable system, programmable control and man-machine interface, which reach an international advanced level.

1. Siemens PLC control system: fully auto control the production.

 2. Seven frequency convertion control system;

     Japanese YASKAWA frequency converter.

 3. Man-machine interface displays and controls machine’s working state, speed, tension and other parameters.

 4. Air-expansion shaft: for first unwinder, second unwinder and rewinder.

5. Photoelectric correction device: for first unwinder.  

6. Auto closed-loop tension controller: for the film on first unwinder,second unwinder,rewinder and the oven.

   Tension is automatically tested and displayed when the machine is working.

7.Mesh roller: for glue spreading;

    Scraper from Switzerland: to oscillate when glue spreading.

8.The inner of laminating hot-roller: heated by heat-conducting oil with even temperature and energy saving.  

 9.Pneumatic pressure machanism: for glue spreading pressing roller and laminating pressing roller, whose pressure can be regulated.

 10.Pneumatic open-type oven:the total length of oven is 8 m;

     The inner guiding rollers shaped in arch: driven by chain initiatively;

     Walkway and guard rail: at the side of the oven.

11.The oven devided into four sections of independent temperature control:the  temperature in every section can be regulated independently;

         External electric heating system.

12.Stainless steel: for the inner of the oven

        Hot air circulation structured in the oven: can save much energy

13.The air exhausting equipment in the entrance of the oven: discharges high   concentration gas which volatilizes in the beginning.

14.Imported photoeletric and hydraulic correcting system: at the exit of the oven.

15.Highly hardened and dynamic balance processing: 

       for all the aluminum guiding rollers