new product traffic wireless control equipment

JFF - XH-10 / 2 phase 10 output

 traffic control equipment

1. JFF–XH -10  traffic signal controller's characteristics: this machine’s internal part combine the most reasonable program design with the advanced microcomputer CPU, to make the machine operation simple, stable performance, complete function; small size, modelling beautiful;So it is a traffic signal controller well-liked by many users.

2. Technical parameters:

use voltage: AC220V

Output Loading: 10 * 3A

size: 33CM * 21CM * 17CM

Output phase: 2 phase

Power consumption: less than 3 watts

3. usage: before use,please check whether the output wiring is correct, (red, yellow, green line should correspond to the related light color, blue line is the public line); After the correct wiring, plug the power into socket. then switch on button on the Bottom Left, then display screen appear "YF",now machine enter into the working status; According to need to reset the passing time of X, Y direction.Save the settings, machines will be automatically run according to programs setting.

4. function: the machine has automatic and manual two working mode.Under the automatic state, X, Y direction’s passing time is 200s(can change). with a group switch of automatic yellow flashing, a group switch of automatic switch.

This machine has 7 fuction keys, its usage will be respectively explained as follows:

Manual/automatic key: the machine has both manual and automatic working pattern, pattern’s conversion is on automatic/manual button to change. Press once and then change one pattern. (if you click this button in the antomatical state,it will be transferred into manual state).

Direction key: in manual work mode, press this button to change the light color of direction X and direction Y (when direction X is green light ,press this button,ot will chage to red).

Yellow flashing key: in automatic state, press this button, signal contrller will change to yellow flashing state, then X, Y direction are all yellow light.when yellow flashing state, press this button, it will enter into automatic state.

Settings key: the keys are used to change the internal setting under the automatic state.

next lighter each time you press the Settings button, the window will display the corresponding 0-19 setting project code.

After set this 19 codes,and then click the setting key again,the machine automatically save these settings and enter to the automatical working status.

Storage key: on setting process, after set up any project (such as only set 01.02), can press storage key save Settings, the machine automatically change to automatic state.

Add keys and minus key: this button is used with Settings button. in 01-19 projects,click the add keys,numerical value rise, click the minus key, numerical value drop; After jumping numerical down, just to loose.Also can click, each click to transfer a numerical (press minus key to start up, machine will automatically restore factory Settings).

5.  matters needing attention when use 

1 )In use process, the machine must waterproof in case damage equipment

2 )The numerical of fuse wire prohibit any increase lest damage machine

3 )After the Battery socket plug into the power supply, prohibit to open the back cover, or pull down the output wiring plugs

4 ) Contract with our company after meet equipment problems

            The surface can change to English version or your local language.