2012 HOT Selling ceiling mount infrared sensors ZM628B

DETAIL

• Power source:100V/AC-130V/AC
• 220V/AC-240V/AC
• Power frequency:50HZ~60HZ
• power source(emitter):DC12V
• Emit frequency:433MHz
• Sense distance:4m~10m(adjustable)
• Light control:<15LUX~>1000 LUX (adjustable)
• Rated load:1200W(220V/AC~240V/AC)
• 800W(100V/AC~130V/AC)
• Sense angle:360°
• Remote control distance:15m (wide place)
• Working temperature:-10°C~+40°C
• Workinghumidity:<95%RH    
• Install height:1.5m~3.5m
• Power consumption:Working 0.45W(static 0.1W)
• Sense motion speed:0.6~1.5m/s

FUNCTION

• Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
• SENS adjustable: It can be adjusted according to using location; low sensitivity with 3m for detection distance; high sensitivity with 12m, it fits for large room.
• Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
• Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.

INSTALLATIION

• Switch off the power.
• Please move the upper cover with anti-clockwise whirl as per the diagram in the crust.
• Fix the bottom on the selected position with the inflated screw
• Connecting the power and the load to sensor as per the connection-wire sketch diagram.
• Buttoning the upper cover on the sensor, whirling the cover with clockwise when LED light bare, then you could switch on the power and test it.