| DOMESTIC CIRCULATING PUMP | | |
| Application | | | | | | | | |
| Warm water circulation,free from any abrasive substances. | | | |
| Transmission Fluid:Lean ,clean,non-corrosive and non-explosive liquids, | | |
| and without any solid particles,fibers or mineral oil. | | | |
| | | | | | | | | |
| Technical Data | | | | | | | | |
| Monophase motor:110-230 volts | | | | | | |
| Frequency:50-60HZ | | | | | | | | |
| Speed:3 speed | | | | | | | | |
| Isolation class:H | | | | | | | | |
| Fluid temperature limits:2 to 60 | | | | | |
| Max working pressure:0.6mpa | | | | | | | |
| level of protection :IP44 | | | | | | | |
| Pump weight of 2.9kg | | | | | | | |
| Link:3/4''-1/2'' | | | | | | | | |
| | | | | | | | | |
| Assembly characteristics | | | | | | |
| Our circulating pumps are immersed rotor type,in which the shaft and bearing are |
| lubricated by the circulating liquid. | | | | | |
| Any immersed component is made of stainless steel,heat resistant or other | |
| materials resistant to corrosion. | | | | | | |
| The high initial torque allows an easy starting,even after long periods of rest. | |
| Low noise and low level of vibrations are achieved and thanks perfectly balanced |
| rotating components. | | | | | | | |
| The connections can be thread , | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| Pump body:Cast iron | | | | | | | |
| Impeller:PPS | | | | | | | | |
| Connections:brass | | | | | | | |
| Shaft:procelain ceremics | | | | | | | |
| Bearings:Graphite | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |