automatic pump control for water pumps KSK-2

utomatic pump control for water pumps

Description:

1.Rate voltage: 220-240V, 110-120V
2.Max. Current:10A
3.Frequency: 50HZ-60HZ
4.Max power:1.1KW
5.Joint screw: G1
6.protection Garde: IP65 PC-13
7.starting pressure to choose:1.5bar or 2.2bar

The product can replace the complicated installations of automatic water pump e.g. pressure gauge,pressure switch, T-valve, check valve and pressure tank). It has the features of stable performace, low maintenance and long life etc, it will indicate the pump has started when the green light Power on lights up after connecting the power.    When the yellow light Pump on lights up, it indicates the pump has been started. The pump continues to operate for a few minutes enabling the system to fill in the pipes and to reach the required pressure. If this lapse is insufficient, the red light failure will light up. In this event, keep the Restart button pressed and wait, with a tap opened till the red light is off. Once released the button and closed the tap, the product will keep the pump at its maximum pressure.

Function
The product is designed especially for all control operation of automatic water pumo. If the particular breakdowns occur, such as water failure, obstruction of the suction pip etc, the product recognizes the breakdowns and the red light failure lights up, at the same a stop signal is sent to the pump to prevent damage caused by its working in the

absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing the restartbutton. The controller can ensure a constant pressure for the water supplying system and thus redus the water hammer effect inside pipeline during water delivering. The controller also possesses the features of reset after power failture. Its starting flow is about 36-60L/h and is convenient for home

application.