Turn waste tyre to oil machine with ISO&CE

• Huayin is specializing in manufacture waste tyres pyrolysis plant, waste plastics pyrolysis plant and oil distillation plant.
• 20 Years experience in this field.
• Have running plant factory, welcome to visit us.
• Green technology, no pollution, turn waste into wealth.
• Help you choose the best and profitable machine.
• Send experienced engineer instruct you install the machine, and help you training your workers..

Input: used whole tyres, shred tyres

Output: 45%-50% crude oil, 30% carbon black, 15% steel wire

Heating material: coal / wood / fuel oil / natural gas

Machine cover area: usually 400 square meters, 40meters length, 10meters width

Reactor material: Q345R Boiler plate 

 Crude oil: Oil from this machine can be used as industrial fuel for burning. 

 Carbon black: First,Carbon black from this machine is crude. You can sell it to the brick

 factory as internal combustion or to the factory which need it as raw materials, such as shoe, 

tire, cable and sealant companies. Second, could make further process, make carbon black 

powder into carbon black briquette, use it for burning.

Steel wire: It can be sold to the iron and steel company directly

Waste gas: we have a speical design could recycling it into fire furnace for burning.

Auto-feeder load the whole waste tires into reactor, seal the reactor and heat the reactor by 

burning the fuel(coal,wood,natural gas,oil) in the combustion system.

There is a thermocouple installed the oil gas outlet to test the oil gas temperature,when 

thermocouple show certain temperature, the oil gas will come out, then go through the 

cooling system to become to oil. 

At same time,there are some gas(CH4,C2H6,C3H8,C4H10 and H2) can not be cooled under normal pressure,they will be 

recycled back to combustion system to burn as energy.

The dust and sulfur gas will be removed by the dust removing system.

After the oil gas run out, there are slag(carbon black) inside of the reactor, HUYAYIN use the automatic discharging system to 

remove it. 

Then HUAYIN use auto-feeder to remove the tire wire steel. usually the 10 tons capacity need about 20 hours to 

finish the whole process. 

2 hours for loading 10 tons waste tires

2 hours for preheating the reactor 

8-10 hours for the tire become gas and cooling become oil 

3 hours for cooling the reactor and discharging the carbon black 

1 hours for removing the tires steel 

• Reactor directly decides the machine's safety and service life.
• Bare reactor, inner and outside are welded by auto welding machine.
• Inlet and output are in one central line, and supported by rollers, in this way, could make it running stabile, even after long time, steel plate deformed.
• Standard gear, separate from reactor instead of welding on reactor, could avoid deformation after long time heating.
• Outside cover has three layers, use special insulation material, could achieve a good effect of heat preservation.
• Made by Q345R Boiler plate, safety and long service life.