waterproof wallpaper for bathrooms adhesive/paste/primer

  Construction Method

 1)cut the wallpaper

2) Mix the adhesive and paste in the ratio of 1:1,  stirring evently.

3) Evently pasting the adhesive directly into the back of wallpaper, and then sticking, not need to wait for to repair the gap of the wallpaper, pasting the adhesive to the gap of the wallpaper by a brush or a small wooden, then press by a scraper or a roller at once.

  Cleaning

  clean the excess adhesive from the wallpaper surface with a wet towel. 

  Storage

  Above 5 °C, a dry, ventilated place

  Shelf life

   12 months

  wall surface requirement

 clean, dry & smooth

   Mixed

  Put appropriate amount of clean water into a clean bucket, then slowly pour into the paste meanwhile stiring evenly for 30 seconds to ensure the paste are fully dissolved. Stir again after staying 5 minutes. You can achieve the best usage result.

      Spreading

  Let the adhesive be spread in the back of the cut wallpaper. Fold the wallpaper and static for 5-6 minutes to let the wallpaper full infiltration of adhesive.

      Pasting

 Paste the upper part of the wallpaper according to the vertical datum, Scrape the wallpaper with a scraper from top to bottom, from middle to each sides to extrude out the bubbles and excess adhesive.

 Cleaning

 clean the excess adhesive with a wet towel.

Dilution ratio

   06-1.5 liter water for 1 liter wallpaper primer, stiring well before construction.

 spreading

  from tottom to up, brush 1 to 2 times according to the different wall conditions.

 Dry time

 30-120 minutes according to different geographical and weather.

 Brushing Area

15-25 square meters per liter according to the density and water absorption of the wall.

 Construction temperature

above 5 °C