|Place of Origin:||Shandong China (Mainland)||Brand Name:||Drick||Model Number:||DRK135A|
|max impact energy::||30J||test accuracy:||0.1g(0.1J)||specimen clamping:||pneumatic|
|gas source pressure:||0.6Mpa|
|Packaging Detail:||plywood ctns packing|
|Delivery Detail:||two weeks after payment|
falling dart impact tester
GB9639 and ISO/DIS7765-85
test the plastic film and sheet with 1mm thickness
max impact energy:30J
DRK135A Falling Dart Impact Tester is applicable in the impact result and energy measurement of the
falling dart from a certain height against plastic films and sheets with thickness less than 1mm, which
would result in 50% tested specimen failure.
Micro-computer calculation, LCD display and Manu interface;
Comply with international standard and national standard both.
Two test methods integration: A & B.
Built-in observation light;
Pneumatic specimen clamp and release;
Falling dart electromagnetic suspension and automatic release;
Automatic testing status judgment;
It is applicable to test the impact resistance properties of plastic film, sheet, composite film, with thickness less than 1mm, such as plastic wrap, stretch film, PET sheet, different food packaging bags, heavy bags, aluminum foil, aluminum compound packing film, paper and cardboard, etc.
At the beginning of the test, choose test method, and estimate an initial mass and Δm. Start test. If the first specimen fails, decrease the mass of the falling dart by decreasing weight of Δm. If the first specimen is not a failure, add the mass of the falling dart by increasing weight of Δm. Test as the same. In brief, increase or decrease the Δm according to whether the former specimen is a failure or not. After 20 specimens, calculate the total number of failure specimens N. If N equals to 10, test over. If N is less than 10, add specimen and continue to test until N is equal to 10. If N is more than 10, add specimen and continue the test until the number of non-failure specimen is 10. Then the tester calculates the test results automatically according to special
It complies with standards ASTM D1709, ISO 7765, JIS K7124, GB 9639.
A, B (Optional)
Method A: 50~2000g
Method B: 300~2000g
Gas Source Pressure
0.6MPa (Users provide gas source themselves)
diameter 8mm polyurethane pipe
AC 220V 50Hz
Standard: method A configuration, mini-printer
Optional: method B configuration, professional software, communication cable
Note: gas inlet of this tester is diameter 8mm polyurethane pipe;
users provide compressed air themselves.