|Type:||Evacuated Tube||Pressure:||Pressurized||Circulation Type:||Direct / Open Loop (Active)|
|Heating System:||Thermosyphon (Passive)||Connection Type:||Direct-Plug||Installation:||Freestanding|
|Housing Material:||Stainless Steel||Certification:||CE||Capacity:||250,100-300L|
|Place of Origin:||Zhejiang China (Mainland)||Brand Name:||Yu-lu||Model Number:||Sunshine Dew|
|Inner tank:||0.4 mm Stainless Steel, SUS-304/2B||Outer Tank:||
0.3 mm Galvanized Steel (dia. 460-480mm)
|Thermal Insulation:||55mm Poly-Urethane Foam|
|Bracket:||Galvanized Steel||Vacuum Tube:||
3.3 Borosilicate Glass, 58 x 1800 mm, tri-coating ALN-SS/CU-ALN
three target vacuum tubes, 1.6mm thickness
|Absorber:||min. 94% absorption rate||Heat Preservation:||minimum of 72 hours||Electrical Heater:||1.5KW|
|Packaging Detail:||Carton packaging, tubes:187*33*24(cm) water tank: 244*46*47(cm)~403*46*48(cm) Bracket: 176*10*29(cm)~295*10*29(cm)|
|Delivery Detail:||15 days after payment.3-10days for samples|
water heater1.good quality
2.being installed easily
3.popular in the world
5.5 years guarantee,15 years life
Powerful collecting hot strong
1. Material use high-borosilicate glass of 3.3
2. AL-N/AL vacuum sputtering selective coating process.
3. Visible absorption more than 0.93, infrared emissivity less than 0.6.
4. Drying properties of the sun more than 175m².°C/KW.
5. 35 degrees Celsius temperature in crease need the sun detonation hpl-n quantity less than 3.8MJ/m². (G more than 800W every quare meters, the environment temperature for 8~30°C).
6. Average loss coefficient UCT less than 0.9W/(m²,°C).
7. Vacuum pressure gas inside the interlayer p≤5×10-2Pa.
8. Heat shock is able to bear below 25 degrees Celsius above 90 degrees cold and hot alternately repeatedly impact three times without damage.
9. Heat-resistant requirements are able to withstand 0.6 MPa pressure.
10. Hail requirements are in radial dimensions is smaller than the hail 25mm attack without damage.
Perdurable Insulation Lasting
1. Using polyurethane heat preservation material.
2. One-time whole foam molding.
3. High-temperature maturation process.
4. 360 degree three-dimensional lock heat seamless without blind angle.
5. Heat preservation layer thickness bigger than 55mm.
6. Obturator rate acuity more than 80%.
7. Thermal conductivity less than 19.83w/m.k.
Solid Strong and durable
1. The water tank uses SUS304-2B stainless steel plate.
2. Arc header, argon high frequency protection of automatic wielding.
3. The bearing pressure ability more than 0.6MPa, sealing work pressure reach 1.2MPa.
4. With TB311-74 regulation size.
5. Support plate thickness between 0.6mm and 0.8mm.
6. Overall connected with bolts.
7. The machine rigidity is strong.
8. The resistance of climate and corrosion is strong.
|1.Thickness of bracket||1.4mm|
|3.Inner tank||stainless steel|
|4.Outer tank||colored steel|
|5.Capacity||150L 200L 240L(according to customer's reqiry)|
|6.Insulating layer thickness||50-55mm|
|7.Inner tank thickness||0.35mm|
|8. tank diameter||460mm|
|13.LOGO||OEM.silk screen pritn/sticker|
|14.Average heat loss coefficient||ULT=0.6˜0.7W(m²×°c)|