the newest design high profit crude oil from waste tyre machine

Working process

Firstly, put the raw material into furnace, then seal the feed inlet system.

Secondly, burn the fuel material(coal. wood, gas or oil)in the combustion system, the reactor will slowly heat, when the temperature reaches around the certain temperature, it will from solid into gas ,the oil gas will be produced by our technology, then go into the water-oil separator, and the heavy oil will be separated, and then go through the cooling system to be liquid oil, the gas which cannot be liquid will be recycled to the reactor for heating.

At the same time, the dust removal device will clean up the dust in the gas, then the gas through the Condenser being cooled into liquid, then the gas exhausted to the air is little, so it is no pollution and energy saving.

Parts of the Pyrolysis Plant

Mainly by 13 parts, which are reactor, catalyst chamber, water-oil separator, two big horizontal Condensers(great cooling effect),two oil tank, anti-back fire device, negative pressure device,vacuum device, buffer tank, water jet flue, condenser pipe, dedusting system, draft fan and chimney.

Outputs Information

Fuel Oil:40%-45%

Carbon Black:30%-35%

Steel Wire:10%-15%

The fuel oil can be used to industrial fuel for burning, or refining to diesel and gasoline.

Carbon Black can be sold to the brick factory as internal combustion or as the raw materials of tire, shoe, cable, etc.

Steel Wire can be sold to iron and steel company.

Profit Analysis

For example the waste tire oil refining equipment processing 10 tons.