Cylindrical Roller Bearing N204E

------The description of  Single Row Cylindrical Roller Bearing

The rollers in a single row cylindrical roller bearing are always guided between the integral "open" flanges on one of the rings. These "open" flanges combined with the specially designed and surface treated roller ends, provide improved lubrication, reduced friction and consequently lower operating temperature.

The ring with the integral flanges together with the cylindrical roller and cage assembly can be separated from the other ring. This results in easy mounting and dismounting, particularly where the load conditions are such that interference fits are required for both rings.

CZD single row cylindrical roller bearings can accommodate heavy radial loads and high speeds. They are manufactured in several different designs, the main difference being in the configuration of the flanges. The most popular are the NU, N, NJ NFand NUP designs.

N design
The inner ring has two integral flanges and the outer ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings.

NU design
The outer ring of bearings of the NU design has two integral flanges and the inner ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings. For manufacturing and maintenance reasons, the two outer ring flanges of large-size bearings of the NU design which are identified by a Drawing No. may not be integral but take the form of loose flange rings.

NJ design
The outer ring has two integral flanges and the inner ring one integral flange. The bearings are therefore suitable for the axial location of a shaft in one direction, see also under "Dynamic axial load carrying capacity".

NF design
The inner ring has two integral flanges and the outer ring one integral flange (fig). The bearings can locate a shaft axially in one direction, see also under "Dynamic axial load carrying capacity". 

NUP design
The outer ring has two integral flanges and the inner ring one integral flange and one non-integral flange in the form of a loose flange ring. The bearings can be used as locating bearings, i.e. they can provide axial location for a shaft in both directions, see also under "Dynamic axial load carrying capacity".

1.The advantage of products: 

1).The stable annual output was 24000000 sets.

 The stable output was upon the stable quality. We will schedule the annual orders plan for you upon the stable annual output.
2).Our tech and service team was very powerful;

         We always can meet your requirements upon our tech and sevice.The large group of tech and service team will meet you around 24 hours. And we will  develop the new products upon your potential orders.

3)The below was our online catalogue, and thanks for your browsing

 2.Quality control: 

Our company inspecter will check the products one by one before we sent it out, and we can also follow customers' special requests to control the quality. We have got little feedback of quality issue from customers these years. So please rest assure.

------ISO/TS16949:2009  CERTIFICATE

------ISO9001:2000  CERTIFICATE

3.Packaging Detail: 

 The packaging of inner box

The packaging of anti-tarnish paper & outer carton

4.The Advantage of Shipment : 

 Our factory was located in the coastal region. It's only 100 to 200 kms from factory to Shanghai or Ningbo port.