plastic cap-making machine:

compression moulding machine

Plastic cap folding machine

plastic cap slitting machine

plastic cap lining machine

plastic cap printing machine

More than 20years only focus plastic bottle cap .

We know more solution make better plastic bottle cap.

2013 new patent capping machine system solution Plastic folding machine plastic film folding machine

The folding machine is specially developed  for those complex lids hard  to match with bottle because the built-in anti-theft ring extends outward .

Min.cap diameter                                                                          25mm
Max.cap diameter                                                                          60mm
Min .cap height                                                                               15mm
Max.cap height                                                                                25mm
production capacity(30*20size)                                    35000-40000caps/hour
Installed electrical power                                                             4kw(50Hz)
Absorbed electrical power    (approximate)                               2kw
Compress air consumption  (approximate)                          600NL/min

FOLDING MACHINE IS DEVELOPED TO TREAT THE TAMPER EVIDENT BAND OF PLASTIC CAP/CLOSURE.

THE TAMPER EVIDENT BAND IS OUTWARD AFTER CAP INJECTIONED.

HOWEVER, IN THIS WAY, THE CAP IS HARD TO CAPPING ON THE BOTTLE NECK.

THE FOLDING MACHINE IS TO MAKE THE BAND FROM OUTWARD TO  INWARD.

Specifications

 plastic cap folding machine
1)Mode: other
2)Capacity: 35000-40000caps/hour
3)Absorbed electrical power(approximate):2KW

Plastic Cap Folding machineis specially developed for those complex lids hard to match with bottle because the built-in anti-theft ring extends outward.

MAIN TECHNICAL FEATURES OF PLASTIC CAP FOLDING MACHINE:

Business Step

we are specializing in plastic injection mould,stretch blow mould,extrude blow mould and plastic cap processing machine for more than 20 years. 

 we can produce a complete set of equipment integrating injection-folding-slitting-lining-printing,backed with technology,high-efficiency and strong after-sales service,making it your ideal choice for the production of bottle lids.

 we are also specializing in producing all kinds of the plastic cap and own more than 20 sets of the injection machince,depending on the more than ten years experience and the efford of the mould and equqipment,we are leader in the line of the caps.

Lower cost higher quality and output.

More pains more gains.