CHASSIS
It is manufactured by using inert-gas welding machinery from/out of high durable steel as cross sectional I Overloadings had been taken into consideration at the durability calculations.

AXLE
It is manufactured in accordance with the European standards. It has a carrying capacity of 3-12 tons and donated with an automatic adjusting break lever.

AIR SUSPENSION
it consists of of raising and lowering and highness adjusting system; parabolic z trusses and shock absorber elements which limiting overloading axle movement.

FRONT AXLE LIFTING
front lifting system can be controlled from inside the cabinet  

 BRAKE

 Brake is designed in accordance with the European standards. WABCO products are used as Equipments. Automatic break ratchets, break ventil, break bellows (30cm cylinder), break lining pads (429 x 200 mm.) and the axle brakes are equipped with ABS system. There are two replaceable and protected break sockets in front of the trailer.

LANDING GEAR
Nursan mark mechanic gears (feet), which are double revolution and each has a capacity of bearing 24 tons.

TYRE
6+1 tubeless tyres with the dimensions 385/65 R 22,5

KING-PIN
It is made of forged steel (42 Cr Mo 4) which is coherent to 2SAE/DIN norms and durable against high level stretching and breakings. It can be replaceable via screw connections.

DYE (paint)
All the surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. As desired, colours can be chosen from the RAL codes.

STANDARD ACCESSORIES
removable rear bumper
one tool box

Water tank made of stainless steel
One chock and chock place
Mudguard
Single spare tyre housing

OPTIONALS
Capacity of 45 m3
LPG carrier with Container Lock
Disk brake
Double spare tyre housing
One food cupboard
Mudguard for each tyre