Jumbo Matte box with French flag for wide angle & fish eye lenses

The mattebox is specifically designed for the use with any DV, HD, or Beta camera

A matte box is a camera accessory that essentially does the same thing as a lens hood and also mounts in front of the lens, but usually includes adjustable fins called French flags. These can be moved and adjusted to reduce lens glare. A matte box is an important device for quality photography and film making.

The special design of the top and side flags allow for an extended bellows effect for maximum light control. This matte box design is the ultimate for performance in the field. The matte box avoids the first filter stage being blocked by the microphone, allowing it to rotate 180°.

THE KIT INCLUDES :

It is lightweight, weighs approximately 1.7 lbs, yet extremely robust.

Specifications:

• Matte box / Sunshade is made up of ABS plastic;
• Dimensions of french flag 16.5" X 6.5";
• Maximum expension of side flags - 200mm;
• French flag and side flags are made up of metal;
• Rotating filter holder;
• It compliments wide angle convertors without vignetting and can be used with any sort of wide angle lens 35, 28, 24, 21, 18 and 14 mm and even fish eye lenses;
• Can be used with any mini35/micro35 system.

ROTATING FILTER HOLDERS

There are two filter holders with Matte Box. Rotating filter holder enables user to eject or install square filter without disturbing microphone or flash settings. One filter holder is stationary while the other one is rotationary in nature.

The French Flag (the light shield above the lens) can be adjusted in order to block out stray or unwanted light. Adding Side wings completes the mattebox and gives the operator total control over the light striking the CCD. It also allows the use of professional quality filters. One filter stage rotates allowing the use of special effect filters and the second filter stage is stationary for use with conventional filters or grads.

Free

ADAPTER RING

Adapter ring is screw in type. We provide only one adapter with matte box.
Simply insert the adapter ring inside the matte box and close the quick release button.

Dimensions
Outer dia: 105mm

Available adapter dia :
37mm , 43mm , 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm, and 82mm

Note: Kindly make a note in order for adapter ring according to front lens thread dia of your camcorder or camera.

ASSEMBLY

The assembly of the unit was intuitive and simple. We provide manual for its assembly. The entire matte box assembly attaches to the camera by a screw-on adapter.

MATERIALS AND WORKMANSHIP

The matte box itself is made from ABS plastic. Everything looks intentional. The reinforced edges are machine-bent. Bolts are well placed, spaced and consistent.

We have designed the Matteboxes with an exchangeable insert adapter ring. This means that for each lens with a different front outside diameter you will need a different type of adapter ring.

 If you have any further queries, kindly feel free to contact us .