Sell The DCHC & DCPC Series Solar Controller

Characteristics:
MCU and professional software are used as the control center to fulfill intelligent
system control, along with PWM high efficiency charging way. Boost, recovery
and float charging auto work for battery long-life and with temperature compensation.
It has high accuracy over discharging control by the discharging rate, overdischarging
control voltage modified by the battery discharging rate curve. Our
controller has the function of self protection from overload, outside and inside
short circuit, reverse connection, thunder and lightning, PV panel reverse current,
over charging and discharging etc. During the short circuit and overload protection,
no any component will be damaged and need change, including fuse. The
LED will indicate the working state of the system in charging, overcharging power
full, power low, over-discharging, over load, out short circuit, load on/off
and etc. Our products meet the industrial production standard with wide temperature
running area -35 to +55. In order to make sure the control accurate and reliable
we use flash memory to save all work control point instead of adjustable resistance
to project the control work point from going off as the adjustable resistance
value is easily changed by temperature and vibration. And our products are
easy to operate, robust in design.

DCHC Series(5~15A)
Descriptions:
The DCHC controller is designed for solar DC power supply system. MCU and professional software are applied as the control center to fulfill intelligent system control.
It's easy to turn on and turn off output through manual operation. And there are two optional voltage modes, 12V and 24V.

DCPC Series(5~15A) Waterproof
Description:
The DCPC controller is designed for solar DC power supply system. MCU and professional software are applied as the control center to fulfill intelligent system control.
LED will indicate the working state. It's easy to turn on and turn off output through manual operation. And there are two optional voltage modes, 12V and 24V.

Rated charging current: 5A/10A/15A
Rated load current: 5A/10A/15A
Work voltage: 12V/24V
Over load protection action: 1.25times rated load current in 60-sec, 1.5 times rated
load current in 5sec; Short circuit protection action:>=3times rated load current
No load current: <=6mA
Charging circuit voltage drop: <=0.26V
Load circuit voltage drop: <=0.15V
Over voltage protection: Industry stage: -35°C to +55°C
Boost charge voltage: 14.6V; x2/24V (keep 10min) (Only applied when over discharge appears)
Direct charge voltage: 14.4V; x2/24V(keep 10min)
Float charge voltage: 13.6V; x2/24V(keep working until drop to the point of charge return voltage action)
Charge return voltage: 13.2V; x2/24V
Temperature compensation -5mv/C/2V(Boost charge, Direct charge, Float charge, charge
return voltage)
Lower voltage indicate: 12.0V; x2/24V
Over discharge voltage: 11.1V no load-real-time modified voltage by the discharge
rate; X2/24V
Over discharge return voltage: 12.6V; 2/24V
Control mode PWM charge mode