China app membrane

N/50mm≥ Longitudinal 450 800 350 500 Transverse 250 300 5 Fracture Elongation. °C -5 -15 -5 -15 No crack 7 Tear Resistance. °C 3 -10 3 -10 No crack Note:No.

The product has high tensile strength, elongation rate, and size stability to perfectly fit substrate distortion and crack. Preventative waterproofing products are wildly used during new construction and are usually installed by the general contractor. Remedial waterproofing products are mostly used when major (or minor) water leaks happen at a later stage and are usually applied by specialist applicators.

Applicators use the heat to soften the modified bitumen on the underside of the sheet. At the same time, please rest assured that your information is also safe here. Q: What about the quality9 We can provide you samples for quality inspection.

It is reinforced by superior and edible starch solution and dried by stoving which make it high intensity, high extension ,high hot resistance and puncture resistance. We put your order into our tight production schedule to ensure you punctual delivery time and send shipping notice to you as soon as your order is shipped. If you have any questions ,please don't hesitate to contact us ,we will provide the best quality ,competitive price and classic service for you .

The APP modified bituminous waterproofing membrane is widely uesd in warm area. Different type and specification of APP modified bitumen waterproofing membranes should be stacked separately Store in cool,dry and ventilated space. Choice-Link offers a range of high quality waterproofing solution-based products especially foe the prefessional .

SBS/APP modified bitumen waterproof membrane SBS elastomer modified bitumen membrane is SBS (styrene-butadiene - styrene) thermoplastic elastomer modified bitumen as dip coating materials to high-quality polyester felt, fiberglass mat, cloth compound tires for the tire base to fine sand, mineral (film), PE film, aluminum and other materials for the cladding, using special mechanical mixing and grinding of elastomer modified bitumen membrane. Features: a) Conforms to the national standards b) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area c) APP is specially suitable for areas of high temperature and of strong sun-shine NO. min 30 3 Heat resistance,°C 90 105 90 105 no slippering,no flowing ,no dripping 4 Tension,N/50mm ≥ Longitudinal 450 800 350 500 transverse 250 300 5 Fracture elongation, %≥ Longitudinal 30 40 --- transverse 6 Cold flexibility,°C -18 -25 -18 -25 No crack 7 Tear resistance, N≥ Longitudinal 250 350 250 350 transverse 170 200 8 Phytotrons accelerating ageing Appearance First lass Tension keeping %≥ Longitudinal no slipping, no flowing ,no dripping 80 -10 -20 -10 -20 Cold flexibility,°C No crack Products showing: Production process: Packing and loading: Company showing:

The product is the perfect combination of quick response bonding technology and superior performance strong crossover membrane. 1.Before placing order, can we make sample firstly9 Sample can be arranged to send to you to test before placing order. We hope this information will be helpful to you, if you have any question, please feel free to contact us, we are always at your service.

Breather membrane may also serve as an air barrier if it is sealed carefully at seams. Breathable Membrane have good "water resistance", good "water vapor permeability", and good "air barrier properties". Micro-porous polyethylene film is the functional layer which is water-resistant but allow water vapour to pass through .

APP modified bitumen waterproof membrane is specially suitable to the building waterproofing in cold area and to the buildings of changeable constructions, while APP specially suitable to high temperature and strong sun-shining. SBS modified bitumen waterproof membrane is specially suitable to the building waterproofing in cold area and to the buildings of changeable constructions, while APP specially suitable to high temperature and of atrong sun-shining. The storage temperature should not be higher than 50 ° C, stand up storage height of not more than two layers; Storage and transport of different types and specifications of products should be stacked separately and should not be mixed.

By heating and melting method and by cold adhesive can be used in alternation as requested. Apart from this, we can provide a wide range of steel products to meet the needs of customers. Please tell us the order information about quality, specification (steel type, material, size) and destination port, you will get the latest price.