• Sourcing Solutions
  • Services & Membership
  • Help & Community
About product and suppliers:
        Q: How to paint parking lot lines?
A: With stencil or tape There are professional machines for all sorts of road lines and parking lots lines paintings , called road marking machine . According to the structure , construction peculiarities and effectiveness , road marking machines is typically split into driving type , self-propelled type and hand-push type . As for painting parking lots lines , the most suitableest suit machine is hand pushed little marking machine . 1.Heat the the coating paintings in hot melting machine . Melt temperature was controlled at 180 degrees Celsius to 220 degrees , and provoked for about ten minutes perfter the coating . 2.The marker stance and the measured stance specified accordance with the the formulation of annd graphics icons and later coated in the figure labeled primer paintings . 3. the primer is dried hot melting coating is feasible to to be conducted at the same time spreading painting marking reflective glass beads , widened nighttime recognizable markings , thickness 1.5-1.8mm . When the marking work starts , the marking bucket ought to be along the road surface . Because there exists one particular gap between marking footwear and the ground , when the marking automobile was pulled forwards , by automatically flowing , a neat marking lines was scraped out , glass beads sow can automatically evenly spread a layer of reflective glass beads on the coating lines . The gap of marking footwear controlled the thickness of the coating , and was n'tt relied on walking speeding of the hand push road marking machine .