• Sourcing Solutions
  • Services & Membership
  • Help & Community
About product and suppliers:
        Q: Where is the camshaft position sensor located on a 1997 jeep wrangler?
A: I dont have a diagram however , if I remember rights the cam sensor 's in the distributor . Pop the cap and rotor off and you ought to be able to see it . 

Q: What does this warning light on the dashboard mean?
A: Look in your automobile manual and it will say to you what each symbol means . For example , verify gauges lighting could be low on gas or petroleum . 

Q: What does a crank sensor do?
A: this is hard to get to however , as longer as you have ramps or jack stands it will are easily . once the automobile is off the ground high sufficiently that you are able fit beneath the engine , sliding under neath and look around for the starter . the beginninger blocs your accessings . remove the beginninger and you will see the single wire connection and the single bolt . remove the wire using a screw driver to pry the clip and undo the bolt . after that , use a pair of adjustable goose neck pliers to grab and twist the sensor and it pops out . to be installed do all in reverse . grab and twist the sensor giving a small pressure to push it in place . subsequently aligning and bolt down and hook the wire back , reinstalling the starter and make convinced it is desirablely mounted and you 're ready to go .