irrigation system

Drip irrigation system mosaic flat emitter type black irrigation drip tape: Features 1. There is window type filter on tne dripper and the anti-clogging capacity is strong; 2. The flow channel is turbulent and the water flow is steady; 3. The water outlet square is big which strengthen the anti-clogging capacity; 4. The distance can be chosen in a wide range; 5. The dripper is installed before being taken out from the factory which saves labor cost and reduce the inveatment; 6. The paving length on the ground can reach more than 80m; 7. Anti-erosion capacity is strong. Sizes outside diameter(mm) thickness (mm) rated working pressure(Mpa) water discharge rate(L/H) water outlet space(mm) filter mesh quantity(mesh) max. paving length(m) even degree(%) each roll length(m) φ12 φ16 φ20 0.2~0.9 0.1 1~4 100~1000 120 120 ≥90 ≤2000 Flat dripper irrigation pipe with two marking line Different flat drippers Shaping mold of flat dripper Technical parameter of the mold Cavity quantity Thirty-two cavity Sixty-four cavity Note Overall dimension of the mold (mm) 350 × 350 ×2 7 0 50 0× 45 0× 455 Gate forms Submarine gate / cold(hot) runner inlet Submarine gate / hot runner inlet Balance material feeding, automatically interrupted pouring Pushing-out mode Once pushing-out of ejector pin Once pushing-out of ejector Making sure that the final products will drop off automatically Co o ling mode Water-cycle cooling Water-cycle cooling Working mode Automatic production Automatic production Service life One point five million times One point five million times Producing deviation ≤ 5% ≤ 5% Emitter specifications ¢ 6, ¢ 8, ¢ 12, ¢ 16, ¢ 20 Deviation of emitter flowing rate Model of injection molding machine for it ZF1600-A ZF2400-A Application Factory show