This product adopts and unique glue botle container to match with the static combining nozzle, through squeezing with glue gun, two-component olloid will have an adequately compound reaction, then solidifying and shaping, the appearance is colorized. lts characteristics are as follows,
1. All effects in one, waterproof, mildew proof, anti-blackening, stainresistant, acid-alkali resistance, ageing resistance, oil resistant, andhard. as porcelain.
2. The color is new and original, itis integrated into fashion elements,showing an elegant, luxury and splendid temperament, reflecting asuble feeling of mercerization, having a unique lingering cham.
3 Convenient and fast construction, the construction is caied outwith glue gun, so it can be fll in fully without ollapse and shrink,one-time forming, easy and fast. It is suitable for family DIYoperation, saving the cost
4. Itis used for wall construction without falig ensuring theimaginary space and aesthetic expression ability of product design.5. High hardness, shrinking percentage is matched with ceramic tile,without crack, solving the problems of single beautiful sealant withlow hardness, sinking, shrinkage and cracking. furthermore, itextends the service time, having an effect of once and forall.
A: B = 1:1(Volume ratio)
With Glue Gun
1. Gap beautified for joint filin, waterproof, mildew proof of variousceramic tiles, glass bricks, quartz bricks, ceramic panel bricks,mosaic and so on.
2. Gap beautified for the gap, floor and wall edge banding of thetable-board in kitchen, shower room, toilet, windowsill, table surfaceand so on.
Method of Construction
1. Clean the slot to make sure that there is no water and powderin it,avoiding air spots and easy spalling after construction.
2. Paste textured paper or adhesive tape at slot side, and then carryout gluing.
3. Use effr-stving glue for construction, squeeze out about 20cm gluestock and abandon it, making sure the glue stock is mixed evenly.
4. Gluing is carried out along the gap, the diameter of glue outletshall be less than the width of gap. Follow the principle of Better lessthan more to avoid overflow of the glue.
5. After gluing, round bar shall be used to level and straighten the gluetape, then tear the textured paper or adhesive tape before the colloidgets dry. In case of overflow of the glue, it can be wiped away by ethylalcohol or be shoveled by perching knife after the glue is solifed.
6. The glue gets solidified after standing for 3-5 hours, and fullysolidified the next day, showing bright as porcelain.
1. In the process of construction, if the p squeezed out, users need to change a new mixing tube.
2. For unused glue in the glue tube, users shall firstly screw off the mixingtube, wipe the glue overflowing the head of rubber tube, then screw up theglue cover for storage, next time, the unused glue can continue to be usedafter changing a new mixing tube.
3. This company guarantees that the outgoing quality of product isqualified, but users shall determine the suitability of the product bythemselves, in the case of any quality problems caused due toimproper construction or external factors, the company will notundertake the losses caused hereinto.