Wrecker coat part mainly includes force taking device, hydraulic transmission mechanism, traction device, towing device and so on to form.Take the power device also includes the pump, take the power, the cable and other parts of the soft axis. Used to output the car power to the pump, into hydraulic energy.It is installed through the wrecker in the cab of the special handle of the control, and then through the soft axis cable to force the gear and the car gearbox force output teeth or separation, and then make the pump work or stop.Hydraulic transmission part: After the clutch is connected, the oil pump starts to work, and the high pressure oil enters the multi-way valve.By doing the corresponding handle on the multi-valve to complete the wrecker rescue to do the action.Traction system:High pressure oil drives hydraulic motors to drive wrecker winch.When the hydraulic motor work, the control valve handle in the corresponding position, you can automatically retract the wire rope, the control valve handle to the "close" position, then traction vehicles or put away the rope.Here to pay special attention to is: wrecker in normal driving, the wire rope hook should be linked to the end of the flat end of the ring.Lifting device using drag arm, divided into the front arm and the rear arm.The front bracket is set at both ends of the swing arm and is fixed with a spring pin. The rear bracket is inserted into the square hole of the front bracket and fixed with the pin, and the tire is locked with the fastening zipper.
Wrecker commonly used accessories: gear oil pump, take power, hydraulic tubing, multi-valve, hydraulic cylinder, hydraulic winch, auxiliary wheel, lights and loudspeakers and so on.
CLW Factory Show
Packaging & Shipping
Waxed before shipping , shipped by RORO or bulk ship