*Connect the brush to a power source and it will enter standby mode with the LCD blinking “OFF” in an alternating blue and white light. Press and hold the Power Button for 3 seconds to turn on/off the brush.
Note: in standby mode, the LCD will always blink “OFF”. It is recommended to unplug the brush once you are finished using it.
*The initial temperature is set at 355℉/ 180℃. Adjust the temperature by pressing the Temperature +/- Button. Each press will change the temperature by 1℃ / 2℉. You can also press and hold the Temperature + / - Button for 3 seconds to continuously increase / decrease the temperature.
*After the temperature setting is done, the brush will go through a temperature adjustment process and the LCD will light up blue. On the LCD, the heating process and the current temperature are clearly shown. When done, the LCD will turn white.
*Press the “Temperature +” and “Temperature -” button at the same time to switch between Celsius and Fahrenheit. You can set any temperature between 122℉ to 450℉ (50℃ to 230℃).
*Active the ion function by pressing the Power Button once, the LCD will show “Ion” once this function is turned on. It removes static electricity to protect your hair from damage and make it smoother.
*You can also set a timer through the Power Button. Adjust the auto shutoff timer
from 30 minutes to 120 minutes through the Temperature +/- Button. When no timer is set, the brush automatically powers off when turned on for 30 minutes.
*The default temperature is 355℉/ 180℃. Recommended temperatures for different hairs:
a. Thick / dense hair: 380 to 450℉ / 199 to 230℃
b. Medium volume hair: 320 to 380℉ /160-190℃
c. Soft / fine hair: 250 to 320 ℉ / 120-160℃
*After setting the right temperature, comb through your hair as you normally do, but at a slower speed. Reduce the amount of hair each time to increase the effect.
BE AWARE OF WATER! BE AWARE OF HEAT! KEEP AWAY FROM CHILDREN!