SHR technology is the world’s most popular and widely used method of laser hair removal and is the only clinically proven method of laser and AFT hair removal that causes virtually no pain. SHR works by gradually heating the dermis to a temperature that effectively damages the hair follicle and prevents regrowth, while not injuring surrounding tissue. SHR combines high average power, low fluency, and a high repetition rate, gradually increasing the temperature of the hair follicle by stacking the laser pulses. SHR gradually heats the skin until the required cumulative energy is delivered to the hair root. Without exposing the hair root to a single high energy pulse, SHR doesn’t cause trauma to skin with high melanin count, making it the safest laser hair removal option for dark skinned individuals. Furthermore, SHR treatment can be performed any time during the year, as sun exposure is less traumatic to the skin following SHR treatment. The sweeping In-Motion technique of moving the hand piece repeatedly over the treatment area virtually eliminates pain, and removes the need for gels or anesthetics. Patients show up for a quick treatment, and are back out the door within a few minutes.
Working principle of shr ipl e-light rf laser permanent hair removal machine
SHR treatment is effective based on its selective absorbability. When the intense pulsed light penetrates the epidermis, the energy of light will be greatly absorbed by the pigments in epidermis. High energy and dark color skin will be with high risk in treatment. Moreover, majority of the heat is reflected and refracted at the same time, only 30%-40% of energy is utilizable. Therefore, it needs to increase the energy for a better treatment result. However, majority heat is absorbed by the pigments in epidermis, which directly block to use high energy for treatment, so that affects the single treatment result.
With the excellence performance of SHR, the machine makes use of selective absorbability of skin, results in the impedance differences between the target skin tissue and normal skin tissue.
How SHR IPL differ from traditional IPL ? With less pain and without comprising effciency & high average power is the most difference between OPT technology with traditional IPL. OPT SHR make comfort as the first priority as well as delivering maximum treatment efficiency. Comparing with our OPT SHR, normal IPL system is unfeasible to produce long square pulse which should reach the relaxation period to target skin. Moreover fluctuations of output energy will easily lead to ineffective treatment result and increase risk of side effect.
Our SHR machine used by physicians around the world, it is the machine that enables you to treat more types of patients and conditions with better outcomes.
Dual wavelength-limited First handle: 640-950nm, for hair removal, comparing than 610-1200nm. the special made cystal filter out the violet and infrared light. Reduce the generation of excess heat from 950nm-1200nm. Short wavelength range improves absorption of focus energy. Reduce the side effect. Second handle:530-950nm, for skin rejuvenation and pigmentation removal.
Large spot size with fast frequency up to 10HZ The spot size is 15*50mm, which is effective to reduce irradiate time. The maximum frequency is 10HZ, which is able to cost less times and obtain an instant effect. The large spot size and 10HZ frequency increases treatment speed by up to 3.5 times. Treat a face in 15 minutes, remove hair on legs in 30 minutes. Our innovative 10Hz frequency design could ensure very effective face tightening. Our clients could use the machine for full body whitening and skin rejuvenation effectively.
Maximize patient comfort via efficient continuous contact cooling Advanced Cooling Technology cools the skin during treatment for longer periods of time, minimizing the risk of burns while maintaining heat within the dermis where hair follicles are treated. The result is a cutting-edge hair removal solution that delivers superior results for all skin types- including dark skin.
User-friendly software design Professional mode for experts and intelligent mode with pre-set parameters for beginners. Skin type, hair density, hair color, hair thickness for options.
With 6pcs Japan Capacitors(10000uf each), charge the machine quickly . Square-Wave power source 3000W, provides uniform & abundant energy . NCRIEO pulse xenon lamp with all Germany material, at least 500,000 flashes.
Hair removal The hair is trimmed and a cooling gel applied to the area to be treated. In a fraction of a second pulsed light heats up the hair. The hair becomes detached from its follicle and eventually falls out. The hair follicle is left unable to produce a new hair. Skin problems Aged skin produces less collagen, resulting in the appearance of fine lines, wrinkles, folds and furrows. The light from SHR stimulates cells called fibroblasts, that are deep in the skin , to produce more collagen. The new collagen produced starts moving upward, towards the skin's surface. Collagen production has increased and is evenly spread in the skin resulting in a smoother texture, smaller pore size and reduced fine lines and wrinkles.
PZ laser manufacturer, a worldwide aesthetic device manufacturer produces high-end products for plastic surgeons, dermatologist, physicians and healthcare professional. PZ laser serves the industry as one of the leading companies with rigorous R&D level and valuable experience with 15 years histories. PZ laser products are being globally marketed by overseas offices and worldwide distributors part.