CMTS, CATV optical receiving,amplifying module, ONU module
1000 Piece/Pieces per Month
Packaging & Delivery
1 - 5
To be negotiated
JH-DN31032C, is a D-node device (commonly known as all-inone). Adopting the design concept of modularization, zero configuration, intelligent management, and simple maintenance. It is deployed in the fiber node, making the fiber node become the transmission path of the integrated service, thus greatly simplifying the network structure.
D-node has built-in CMTS module, CATV optical receiving and amplifying module, ONU module (optional), etc.. These modules can be replaced separately. Jinghong also creatively increased the spectrum analysis module, so that RF signals can be fully spectrum real-time monitoring. The NMS can automatically monitor the working status of each module, automatically analyze and locate the faulty module, and alarm or notify maintenance personnel to replace it at the site.
The basic service of cable operator has stable and reliable guarantees. JH-DN31032C has four high-level output ports with a frequency range exceeding 1 GHz, which can completely replace the original optical receiver. It can flexibly adapt to 10GE/GE/GPON/EPON networks through matching modules such as SFP+/SFP/OTU/ONU. The built-in CMTS module is bundled with 32*10 channels, and the 2Gbps data rate is sufficient for the user's big bandwidth requirements.
JH-DN31032C is compact and waterproof to accommodate varies installation environments. Its excellent transmission capability, combined with intelligent management software, can meet the NGB requirements of cable operators.
• CATV optical receive and amplify • IP data from GE/EPON/GPON is forwarded in coaxial cable • Real time monitor the full spectrum RF signal quality of fiber node • Support service: DVB, IP data, IPQAM, IPTV, etc.
• Based on the mature DOCSIS3.0/C-DOCSIS standard, Support the evolution to DCAP and CCAP structures. There is no investment risk. • Modular design, zero configuration application, intelligent management, simple maintenance.
• It overcomes the defect that the traditional CMTS can only be deployed in the headend, and greatly reduces the "funnel noise" interference. • Saving frequency sources • Remote monitor, Remote maintenance, Remote update
•The transmission distance is almost unlimited • Low Coverage Cost, Low unit bandwidth cost • It is an integrated compact device that can completely replace the original optical node equipment.
Adopting standardized mature technology without investment risk Because full service optical station (D-node) is based on mature and reliable standardization technology, it can make full use of existing transmission network and terminal equipment. Whether IP backbone is Ethernet or EPON/GPON, it can be compatible. Cable operators will no longer have to worry about choosing which EOC technology to protect existing resources and avoid investment risks
Simplified network structure with better profit More Stable Because the size of the covered users is small, the "funnel" becomes smaller, the total amount of noise naturally decreases, and the built-in CMTS module can operate stably in a "clean" network environment. In addition, due to the decrease of cable connector, it also helps to improve reliability. The Average Bandwidth of Each User is Higher When the total bandwidth is constant, the less users are covered, the more bandwidth each user will get. Construction and maintenance is simpler and more convenient The inherent contradiction between coverage efficiency and funnel noise is solved For traditional DOCSIS schemes, because the equipment is expensive, CMTS is usually deployed in the front-end room for wide coverage. The larger the coverage of each CMTS, the higher the coverage efficiency and the lower the cost, but the larger the "funnel" the greater the noise. This seems to be a natural contradiction. Now, the adoption of D-node can solve this contradiction
Low coverage cost and lower cost unit bandwidth Compared with EOC, D-node has obvious bandwidth advantages, stronger adaptability and higher coverage efficiency. Compared with FTTH, D-node can save a lot of engineering cost, reduce construction investment and investment risk. The bandwidth advantage of D-node can fully meet the needs of operators for large bandwidth business.
Advanced management ability By means of embedded WEB, NMS and Telnet CLI, D-node can be centrally managed or managed separately. The management includes the device itself, RF signal full spectrum analysis, signal quality analysis and terminal user management, as well as fault analysis, positioning, alarm management, etc. Manage the Device Monitor and control the operating status, working voltage, level, temperature, reset and other parameters of the equipment, remotely configure and modify the operating mode and operating parameters of the equipment, and also have a fault alarm function. Manage the end user It includes user basic information, permission control, speed limit setting, billing management, etc. It can also monitor the running status and parameters of the CMs. Analyze the RF spectrum snd signal quality D-node built-in signal analysis module, equivalent to a vector signal analyzer. It can analyze the signal spectrum of each RF port from 5 MHz to 1000MHz, and can analyze the quality parameters of the DS signal, such as level, C/N, MER, constellation diagram, etc. It can monitor the noise interference status of the return path at any time and make early warning. Fault Location Due to the modular design, the management system can intelligently analyze the fault range and judge the fault attributes when the equipment fails. If it belongs to the hardware fault, it can locate the malfunction module automatically and prompt the maintenance personnel to replace it.
All in one JH-DN3416B
91.8% Response Rate
Outdoor CMTS JH-F3416B
91.8% Response Rate
16*4 CMTS JH-HE3416B
91.8% Response Rate
The first CMTS manufacturer in China, have been in this line since 1999
Global buyers all over 50 countries and places
Top product quality and prompt after-sales support, 7*12 hours
OEM service offered, design service offered,buyer label offered
Jinghong V & T technology Co., Ltd. is a R&D company providing complete solutions for HFC network since 1999. It is located in Chongqing, China. With the concept of "Triple Play", Jinghong has been pushing the DOCSIS solutions into SARFT HFC network in China. The main business scope includes R&D, manufacture and sales of cable-based transmission equipment, software, and integrated solution. With years of accumulation on staff and technology, Jinghong now holds a professional team in continuous product development and project implement. JH CMTS family has been deployed in China cable network in more than 10 provinces, with the success promotion in European market in 2007, now Jinghong's CMTS products are serving networks in nearly 50 countries. The popularization of JH CMTS family proofed its capability of being the alternative CMTS equipment of U.S. product for Level 1 Chinese cable ISPs. Main Business Scope HFC"Triple Play" equipment R&D, manufacturing and sales; Bidirectional HFC network re-engineering projects; ARFT system integration based on HFC network.
Packing & Delivery
Items will be shipped within 7 working days after T/T in advance via UPS, DHL, FedEx or EMS etc.
Lily Wang Sales
Chongqing Jinghong V&T Technology Co., Ltd. Tel: +86 02368697358 Mobile: +86 15982218623 Skype: li.lian8 Web: www.cqjinghong.com Add: 21F, G1, liangjiang International Building, NO.1120, Jingkai Avenue, New North Zone, Chongqing, 401120, China