3. Able to conceal minor wall cracks and tears caused by regional mechanical and temperature changes
4. Various color and pattern options
Recommended application system:
1. Treated Concrete Wall
2. P0503 Anti-Cracking Rough Putty (1-2 coats)
3. Exterior Primer (1 coat)
4. A0003A Texture Paint (1-2 coats)
5. E0106 Waterborne Topcoat (1 coat)
Technical data sheet:
Packaging & Shipping
30kg or 80kg( the data below is for 30 kg )
3TREES Metal Bucket.(OEM is Available)
Pail Diameter superior (non-adjustable):
Pail Diameter bottom (adjustable):
Pail Height (adjustable):
Pail Matched surface cover diameter:
Pail Matched bottom cover diameter:
One 20 ft Container :
Storage: 6 months in conditions:
Sealed, Cool and dry, far away from heat.
1.What kind of problems will face in paint application?
Paint applications are prone to the following questions:
Peeling Off: This is the use of low-grade putty, causing poor adhesion of paint peeling off the wall; Bulbing: wall was not completely dry, water evaporating or within the walls of the film causing drumming; Chalking: wall loose, excess water or when the temperature is below the application requirement; Crack: wall (or substrate) cracking, is by the use of poor quality putty;
Fade: the wall was not full dry, and the wall was too alkaline, mainly caused by paint quality problem.
2.What are the advantages and disadvantages of using brush or roller?
Brush is the first and easiest method of painting, for painting objects of any shape, the disadvantage is inefficient, labor-intensive, general decorative properties. Roller in the other-hand is suitable for large-scale construction, high efficiency than brushing, but somewhat less decorative.
3.How to apply effectively by using a roller?
Brush dipped in paint no more than half of the brush hair, and if the brush roots stained paint, paint brush will be deformed, brush life will be shortened. Stained paint brush paint brush before the inner surface of the container must apply onto it, so as to remove excess paint dripping paint to the ground. Should start brushing paint brush vertically as far as possible, with the bristles brushing the abdomen, in the last rationalize paint brush over paint when received, will brush flatly, brush lightly with the tip of the bristles.
4.How to deal with old interior wall refurnishing?
Be sure to use the tool to eradicate the entire old, mutilated old paint surface. For complete old paint surface, use yarn polished smoothly. If it stick wallpaper and maintained a good surface condition, you can also be directly brushing paint. When brushing, to different climatic conditions and brushing tools, dilute with small amount of water.
5.How to paint new interior wall?
The new wall must be fully dried; the surface moisture should be less than 10%. You can use putty to the wall batch level. In order to make the film firmly smooth, color durable, require the use of water-based or oil seal wall paint primer.
6.How to paint exterior wall?
From roof to floor, gutters, capitals, beam and rafters to the walls, doors and floor. Wherein the top to bottom of each section also be painted. In brushing every part, you cannot stop halfway, if need to stop, choose of the original building structure joints, such as wall and window frames on connection. This will avoid unsightly seams.
7.How to paint windows?
Hinged horizontal are to push open the window before painting. The order is at the top, sides, bottom, and later a bar, window frame, window sill plates and top line.
8.Painting-A complete process
Substrate processing - remove the surface dirt and loose parts, batch inserts, polished, if the surface is still below standard then you need to re-grant inlay polished, clean the surface, brushing primer, after completion of discovering uneven wall should repair before flat primer, finally paint finish.
9.What are the types of paint tools?
1. Brush 2. Roller 3. Spray Gun
10.I know the floor area of the room, how to calculate their brush area?
If you know the room floor area and room high 2.5 m: You can use floor area * 3, get the brush area. If the room is more than 2.7 m or less than 2.5 m, you can increased or decreased corresponding to the coefficient.
11.How to remove paint fumes?
Put charcoal or its powder in all corners of the house Many upscale renovated home will bury some carbon powder beneath toner layer, there can also try to put carbon in between the bricks and inner walls, so after decoration smell will be gone and will be very healthy.
12.Paint application tips
1. Do not dilute dark color paint, otherwise will cause chromatic aberration.
2. Drywall seams are to be bandaged.
3. There is a gap in the wall where you want the really cool cloth better.
4. Best to eradicate original wall putty, or brush glue cementing again.
5. Try to buy well-known paint brands, decoration companies recommend or not recommend foreman fame try not to use.
6. If weather is too humid, do not paint.
7. Sanding after Paints, coatings and others are completely dried.
8. Paint must be fully dry before move to the next step