Step into the future with an efficient, modular UPS that grows with your business
Reliable: Redundant design for modules eliminates single points of failure, iPower pre-warnings for key components in case of power supply interruption
Efficient: Reduces PUE with a low-load, high-efficiency design that is 95% to 96% efficient at the most common load
Simple: Fully modular architecture expands with business growth and online customer maintenance greatly shortens the Mean-Time-To-Repair (MTTR) to enhance availability
Smooth capacity expansion
To avoid power interruption risk in capacity expansion, the capacity of UPS system is planned large enough to meet the power demand in 3-5 years, which leads to low efficiency operation at the initial stage due to low load rate
UPS5000-E uses module design and all of power module, bypass module, and control module support hot-swap, which makes smooth capacity expansion according to demand possible and reduces the initial investment
Online maintenance, reducing MTTR greatly
Availability is used to weight the degree that a system, subsystem or equipment is in operable and committable state. It's positively related to MTBF (Mean Time Between Failures) and negatively related to MTTR (Mean Time To Repair)
For traditional UPS, customers need seek help from the suppliers and long recovery time is required because in maintenance engineers need shutdown and dismantle the UPS, and replace the failure components or boards
Hot-swap design makes the failure recovery time reduce greatly, and the system availability can be effectively improved as a result. The O&M engineers after trained can replace the failure module of UPS5000-E themselves in few minutes
High efficiency at low load rate
Due to redundancy configuration to ensure reliability and excessive configuration at the initial stage to meet the power demand in 3-5 years, the UPS system of traditional datacenter often operates at load rate of 10%-40% and the operating efficiency is far below the value claimed. It's estimated that the UPS loss takes up 6%-10% of the total power consumption in datacenter Huawei UPS can keep high efficiency operation at low load rate: 96% at 40% rated load and 95% at 20% rated load
Given 200 kW load and air conditioner with a COP of 3:1, - 80, 183 kWh can be saved compared to traditional UPS (92% efficiency) - 257, 731 kWh can be saved compared to legacy UPS (86% efficiency)
Intelligent hibernation design
When the load rate is very low (below 10%-15%), intelligent hibernation can be enabled and some power modules will switch to "standby" state to boost load rate and improve operating efficiency
To ensure reliability, at least one power module serves as redundancy module and when load increases dramatically, the sleep module will be awaked instantly
Achieving 99% efficiency at ECO mode
In good grid area, ECO mode can be enabled to improve efficiency to more than 99% and the maximal energy-saving can be achieved
At ECO mode, the load is powered by static bypass (the allowable input range can be set) and the inverter is in "standby" state
When input abnormality occurs, UPS5000-E will transfer to online mode in several milliseconds to ensure power continuity and quality
NetEco 1000U Introduction
iManager NetEco 1000U can run on the Windows operating system and can be accessed through a web browser. The iManager NetEco 1000U enables you to monitor the key performance indicators (KPIs) and alarms of the UPSs in real time. In addition, it enables you to remotely control and manage the UPSs. This increases the centralized management and remote operation and maintenance capabilities for the UPSs. NetEco 1000U supports connection through USB Data lines, RS232 cable, or network cable.
NetEco 6000 Introduction
NetEco is a new generation data center management system launched by HUAWEI. It manages the real-time data and status of data center infrastructures, including power, environment, video, and door status and generates alarms if any fault occurs.
NetEco displays data center layouts and data reports for customers to easily query equipment status, and provides a standard platform to apply to all data center solutions due to its flexible configuration, smooth capacity expansion, and hierarchical management.
Value & Features
High availability, warning and troubleshooting
Foresight warning of faults and risks improves IDC availability
Quickly faults location, virtual inspection Smart interaction, energy saving
Dynamic PUE management
Optimizing important power and cooling services Rapid deployment, one -button launching
Pre-configured software and parameters, one-button launching
Parameters of AC and UPS loading, testing time saving Easy visualization maintenance in 3D view
The 3D design tool realizes 3D visual maintenance
Dynamic 3D display of site temperature, eliminating hot spots
25 kVA/kW and 40 kVA/kW
25 kVA module: 125 kVA rack
40 kVA module: 120 kVA/200 kVA/
320 kVA/480 kVA/600 kVA/800 kVA rack
50 kVA module: 200 kVA/300 kVA/
400 kVA/500 kVA/600 kVA/800 kVA rack
Power module, bypass module, energy
control module, and communication cards
Input and Output
Three-phase input, three-phase output
360V to 480V DC
Output Power Factor
125 kVA: 95.5%; others: 96%
125 kVA rack: < 65 dB
120 kVA/200 kVA/320 kVA rack: < 65 dB
480 kVA/600 kVA rack: < 68 dB
800 kVA rack: < 70 dB
(H x W x D)
125 kVA rack: 2,000 mm x 600 mm x 850 mm
120 kVA/200 kVA/320 kVA rack:
2,000 mm x 600 mm x 850 mm
480 kVA rack: 2,000 mm x 1,200 mm x 850 mm
600 kVA rack: 2,000 mm x 2,000 mm x 850 mm
800 kVA rack: 2,000 mm x 2,400 mm x 850 mm
Modbus, SNMP, and dry contacts
Packaging & Shipping
1. All products will be packed in carton, so the product can get effective protection to avoid damage.
2. Packaging according to customer requirement.
1. We shipping viaDHL / FedEx / TNTetc for samll orders. Yow can get your packages in about 3-5 days all over the world.
2. For big order, we will arrange Air cargo for your shipment, so it will be much cheaper than DHL, UPS etc.
3. You can choose your own shipping agent, we will provide good cooperation for it.
1.Customes can contact us for any question by Telephone, Skype, Trademanager, E-mail, Whatsapp, QQ etc.You can ask these contact from our sales.
2.All products have been tested and packaged in good condition before dispatch.
3.COMBASST will be responsible for defects in workmanship & materials and product’s quality issue while the product is used properly according to the manual and in warranty.
4.We provide 3-5 year warranty and life-long technical support for all our product.
5.Any part that upon COMBASST’s examination proves defective, return or other solutions per discussion.
6.Return and Freight:
1).Under Warranty: The customer is responsible for freight & insurance charges, includes custom charges
when the equipment and/or parts is shipped to Manufacturer/Supplier for service.
COMBASST is responsible for the freight & insurance charges to the customer.
2).Warranty period: The customer is responsible for any freight & insurance charges.
Combasst Industry Development (Shanghai) Co,.Ltd, which provides main services in terms of broadband communications and information technology industries, is a high-tech enterprise integrating research and development, production, sales, and service. Our products mainly cover the optical signal transmission and access, signal transmission and access, photoelectric signal conversion and photoelectric signal.
The clients include major national telecom carriers, as well as radio and television, electricity, mining and other industry professional net users. We have already established long-term friendly and cooperative relations with them. In addition, our company has been actively expanding into foreign markets. The products are exported to many foreign clients in Europe, America, Southeast Asia, and the Middle East as well as Japan, Korea and other neighboring countries and regions.
We will constantly improve ourselves and feed back with our superior-quality products and meticulous care to all walks of partners, creating a win-win situation.
Manufacturer, Trading Company
Communication equipment (Transmission equipment,Router,Gateway equipment,WIFI equipment,ACCESS equipment,voip product)
Number Of Employees:
11 - 50 People
Combasst Industry Development (Shanghai) Co,.Ltd
Address: Room 110,No.389 JinWan Road, ShangHai , China