Woodworking square lumber vacuum dryer,high frequency lumber dryer from factory
High Frequency Lumber Dryer is the new generation woodworking drying machine.TheVacuum Wood Dryer adopts high frequency drying, inside and outside of wood timber is heated at same time, uniform heating, high speed drying, short time and good quality, which may keep the timber nature color, meanwhile, the timber is aerated under the vacuum environment, non-cracking, especially applied for the thick and hard precious wood, wet wood. It is about more than 10 times faster than any convention kiln and lumber comes out cleaner and straighter,with almost zero checking.
1.High frequency mdedium heating has the characteristics of fast speed and high effciency,which can make the green timber finish drying just need a couple days.
2.Unifrom heating: Because the electromagnetic field will act every part homogeneously and have the penetrate effect,that can make it heating homogeneous in electromagnetic field and avoid the phenomenon of the hot outside but cold inside.
3.Easy control in heating process: heating speed has nothing related with heating conductionability.When power on,it will heat:when power off,heating will stop.It is convenient to control by adjusting the heating time.
4.Heating improve the quality of products: In the wood drying process,it makes the quality of products more stable and it has the insecticifal anticorrosive function.
5.It is suitable for automatic production,taking up a small space and needin a low intensity.
6.Environmental protection,no boiler required,no dust,no smoke and no high temerature rediation,safe and clean.
The result of drying by High Frequency Wood Dryer Kiln
The Specifications of GZ-4.0III-DX Wood Dryer Kiln
High Frequency Vacuum Wood Dryer Kiln
Type of work:
high-frequency heating, vacuum dehydration
4.4 cubic meter
Total input power:
All kinds of wood
Depending on the technology needs
Max Length of Wood:
Packing:standard and pubic export packing or as the csustomer' requirments.
Shipping:within 20 days.
Our engineer will install all parts for buyers, the buyer can use it directly when they get the machine.
Introduction book inside.
Sample:we can provide free brochures to cutomers.
Warrenty:all kinds of mahines can be ensured 1 year.
Cutsomer service:If there were something wrong during this warrenty, our engineer would be available to oversea to repair it freely.