Record holder set individual package.
Cleaner individual package
Cleaner and record holder set collected in a master carton
1 - 10
11 - 100
To be negotiated
Ultrasonic lp vinyl record cleaner This is a device dedicated to cleaning vinyl records. It is suitable for 7",8",10" 12" vinyl records cleaning.
It can washes 8pieces records one time. Greatly saves cleaning time for you. It automatically rotates to clean, freeing your hands. It consists of two parts. an ultrasonic cleaner and one set of records holder. To the ultrasonic cleaner, there are 5 models CJ-031, CJ-031B, CJ-031S, CJ-031ST, CJ-031SD optional, they are standard 6.5 liters ultrasonic cleaner, the inner tank size and out size are the same, the difference between them are the operation mode and functions. Select suitable model according to requirement.
Mechanical knob adjust cleaning time. Ring bell after work.
Mechanical knob adjust cleaning time/ temperature;Direct quick setup;Ring bell after work.
Ring spacing, multiple discs at a time for cleaning.
Many records cleaning
It can washes 8 pieces records one time. Greatly saves cleaning time for you.
180W (3pcs transducers)
Stainless steel SUS304
20~80 ℃ adjustable
Stainless steel SU304
AC 100~120V 60Hz AC 220~240V 50Hz
CE EMC & CE LVD & RoHS & FCC
CJ-031SD Cleaner machine main functional characteristics:
1.Semiwave /Full wave +Degas function
2.Digital LED display/adjust cleaning timer/heater
3.Touch key designing easy to operate.
4.Timer 1-30min adjustable;
5.Heater 20-80c adjustable
6. Inner tank material: SUS 304
7. Outer shell material:Sus 304
8. SUS 304 lid, reduce noice.
9. SUS 304 basket, OD=10mm 10. Independance power swicth
11. Hight quality silicone antislip foot pad
12. Industrial grade power cord
13.Independent research and development drice board
14.Industrial grade transducers
15. 4.5L above with cooling fan and ventilation hole.
16. 6.5L (including 6.5L) is installed drain valve.
Adjustable,detachable and self-rotaing vinyl record holder set Vinyl record holder set is an important part when the ultrasonic cleaner is used to clean Lp records. this holder set is including: 1pc motor, 9pcs rubber rings, 1 power adapter and 1bracket. It is detachable,user can easy to assemble and disassembly themselves by referring to the photos we provide. It is adjusable, the user adopts the manual lifting method, drops the record into the ultrasonic cleaning tank to clean the record, and when the cleaning is finished, the record is raised from the cleaning tank. Keep it up for a while and let the record dry It is self-rotaing by conected the adaptor. The rubber ring diameter is 10cm, thickness is 8mm, these rubber rings is to protect the labels on the LP record from wet when washing on ultrasonic cleaner . With this holder set, user can at most clean 8 records at a time. This holder set is suitable for SHENCHAOJIE model CJ-031B, CJ-031, CJ--031S, CJ-031ST,CJ-031SD. Or the similar size ultrasonic cleaners. Please refer to the following technical informations:
Easy to assemble and disassemble, easy to operate.
Manual lifting /drop
Automatic rotating motor with power supplier, 6~7 turns per minute.
These machines to clean the dust and water-soluble mucus attached to the record has a good effect. After cleaning, the noise caused by dust, like exploding beans, was reduced by 95%. This machine is designed for the principle of ultrasonic vibration, it is physical cleaning, not chemical cleaning. The noise produced by the following reasons cannot be removed: 1.Oil stains, finger prints, sweat marks. Because they corrode plastic records and leave imprints, although the machines wash away sweat and grease, the cleaners have no ability to repair the marks. The print is still in shape, and any cleaning machine has no ability to repair it. 2.The marks left by mildew-stained records are also irreparable. 3. The scratches on the record surface can not be repaired by ultrasonic cleaning 4.Use ultrasonic wave to wash glue directly, the viscosity effect of insoluble water is not good. Must be rubbed with alcohol or special cleaning solution, manual local cleaning.
To get better effect, when start work, you should be paid attention to: a. Before starting the ultrasonic cleaning machine, let the rye soak for a few minutes. b.Ultrasonic washing takes at least 5-10 minutes c.Should be added to ultrasonic detergen d.After ultrasonic washing, still need clean use water to wash the record, remove the particles attached to the surface of the record. e.Ultrasonic propagation in the air is much worse than in liquids. In a mixture of water and air, ultrasonic wave propagation in the air is much weaker. After 30-40 minutes of ultrasonic washing, the solution will be vaporized by ultrasonic wave, which accumulates a large number of tiny bubbles. Therefore, after each ultrasonic bath, to start the bubble removal process, or the washing solution needs to rest for dozens of minutes, let it automatically eliminate tiny bubbles or replace the new detergent.(CJ-031SD has this funcion
Cleaner packing details:
1x stainless steel basket
1x stainless steel lid
1x user manual
Packing size: 410*255*355 mm
Record holder packing details:
1pc power adapter
1 pc bracket.
9pcs rubber rings,
Holder box size: 390*360*150mm
Cleaner+ holder carton : 460*450*440mm
Company found in 1996. Our R&D team has 17years' practical experience of working in ultrasonic field,independently developed and manufacture all kinds of ultrasonic cleaners, total 10 series and more than 100 models products. all products passed CE, FCC , ROHS certificates.