Screw oil press working principle
1.When oil press is on work,material enters the extruding chamber from the hopper and then moves forwards
by the rotating pressing screw and is pressed.
2.Under high temperature condition in the chamber,there is quite strong friction among press screw,chamber
and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating,the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating,causing every particle
inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of
helping protein change property, damage colloid, increase plasticity, decrease oils elasticity, resulting in high oil.
Structure of automatic screw press oil
automatic screw press oil is a popular type of oil press machine, mainly composed of feeder, gearbox, pressing
chamber and oil receiver.
Some screw oil press machines are equipped with electric motors as required. Pressing chamber is the key part
which contains a pressing cage and a screw shaft rotating in the cage.
An electric cabinet is also necessary to control the whole working procedure.
Features of automatic screw press oil
Different from the automatic screw oil press, this screw oil press has its own features and markets.
1.Made of high quality steel, wear-resistant and easy to clean.
2.With the properly designed pressing chamber, the increased pressure in the chamber highly improves working
Why Choose automatic screw press oil ?
1.Wide application: ideal machine for pressing various oil seeds, such as peanut, soybean, sesame, flax seed, etc;
2.High oil yield : the oil output is 35% - 50% higher than common oil press.
3.Low residual: the oil residual in cake is only about 5%.
4.Little land occupancy: only 10-20 square meter is enough.
Why do they choose HongYang?