26pieces in a carton;
Carton size: 45*33*42CM;
23kgs each carton;
including 24v60w or
supply and cord.
8 port 1000M poe switch, gigabit poe switch, network switches
The ZQ-POESG-8-7 Power Source Convenient switch combines an small-high
efficiency 8-port 10/100 /1000Mbps switch with 7 PoE port.
The ZQ-POESG-8-7 PoE switch use an external 18VDC to 57VDC power adaptor.
All 7 PoE Ethernet ports can provide 30W power as well as 10/100/1000M data
transmission over standard readily available Cat 5e/6 cables.The ZQ-POESG-8-7
PoE t allow for data and power to be transmitted over a single Ethernet twisted-pair
cable to the attached devices.
The ZQ-POESG-8-7 switches is Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the passivet PoE standard, allowing users to attach any PoE compliant device such as wireless Access Points (APS), VOIP phone, IP camera, printer and Network Attached Storage (NAS) to the PoE Switch without requiring additional power.
On a network. The unit is designed with home and small business users in mind and is a cost effective solution for environments where AC power is not available or too costly to install.
* 8 switch ports with 10/100/1000Mbs auto detect operation with status LED * Available power supply options
18 volts, 24 volts, 48 volts 56 volts 30 watts, 60 watts, 120 watts 100 to 240 volt AC input, 50 or 60 hz high efficiency
* 7 always on PoE outputs with either Mode A and/or Mode B
Mode A power and data on pins 12 (-) and 36 (+) Mode B power or pins 45 (+) and 78 (-) with data on pins 12 ,36,45 and78
* Dual PTC fuses on each PoE output port
One 650 ma fuse per port for Mode A One 650 ma fuse per port for Mode B
* 18 volt to 56 volt operation
* Function switch on/off Mode A/B * Power supply inputs
2.1mm power connectors, center positive Mode A input with LED status Mode B input with LED status LED indicates 18/24 volt operation or 48/56 volt operation Maximum input current per mode – 2.5 amps Mode B PoE power input from the uplink port – 1 amps max
* Dual Power supply operation
Redundancy - 48v 802.3af only – see text Load balancing – 48v 802.3af only – see text Mixed voltage – Mode A at 48v and Mode B at 24v – see text
* Uplink port 10/100/1000 Mbs
No PoE voltage out Auto detect 568 A or 568 B connections
* 802.3af emulation ( always on, no autonegotiation)
48 volt in either A or B modes * Mikrotik, OpenMesh, Ubiquiti passive PoE