Digital Tire Pressure Gauge and tyre tread gauge ABTG-8124B
►Convenient World Wide Use:
Tire Gauge Reads psi,bar,kpa,cm2.
►Very Accurate measures Tire Tread Between 0-19/32 inch,0-15 mm.
►Pressure between 5-99 psi,0.35-6.80 bar,35-680 kpa,0.4-7.00 kg/cm2.
►Safety color,coded Red.
Yellow,Green,Tread Depth Indicators for quick review.
►Easy viewing,Extra large Readout.
►One button control for Pressure or Tread Switching.
Measuring Tire Pressure
1.Press the "ON" button to activate.If the last measurement was tread depth,press ON button to change to tire pressure mode.
2.To change measuring units,press and hold ON button for 3 seconds until an icon blinks,press the ON button sequentially until the required icon blinks,then release button to capture units are set when icon stops blinking.
3.Align the nozzle of the tire gauge with the valve stem on your tire.
4.Apply sufficient force to engage the nozzle with stem,while maintaining a proper pressure seal.As you engage the tire gauge to the valve stem a sudden surge of air will create a crisp sound.
5.Carefully listn for any leaks,and press firmly on the valve stem to obtain a good seal.
6.Hold the tire gauge on the valve stem until a reading appears on the diaplay and locks.The gauge will shut off automatically.
Tread Depth Measurement
1.Press the ON button to activate.
2.If the last measurement was tire pressure,press the ON button to change to tread depth mode.
3.To change units,press and hold the ON button for 3 seconds until an icon blinks.Press the ON button again seguentially until the required icon blinks,then release button to capture.Units are set when icon stops blinking.
4.Hold the gauge against the tread to be measured,and push the slider into the grooved section of the tire tread until it meets resistance,and then the tread depth reading is displayed.
Tread depth specification:
a)Depth<2/32 inch or 1.6 mm,the color is red.
b)1.6 mm or 2/32 inch ≤Depth<4/32 inch or 3.2 mm,the color bar is yellow.
c)Depth≥4/32 inch or3.2 mm,the color bar is green.
5.Remove the gauge from the tire,the gauge LCD display reading will decrease if the user pushes the slider indicator up towards the top.
6.If no additional reading is made,the units will automatically turn off after a 30 second time out period.
Replacing the Battery
To replace the battery,open the battery vocer on the back of unit and remove the old battery,insert one new CR2032 battery,ensuring correct polarity.Replace the battery cover.
SUNSOUL exhibition show
In combination with our strategic direction.
We participate in 4-6 exhibitions in domestic and oversea every year. Although the effect of the exhibition is not directly in the past, there are fewer and fewer customers directly placing orders. But we always invited some potential customers to meet with us, so the possibility of a deal is very big. Moreover, after the exhibition, we will examine the local market situation. Through the understanding of the final consumers, it can help us to improve the performance, quality and packaging of the products.And we also visit partners office and warehouse,then we can know each other much well and in order to establish long term business relationship.