500ms,20ms,50ms/230VAC 500ms,20ms,15ms/115VAC at full load
AC input current
AC inrush current
110%~150%rated output power
Protection mode : Hiccup mode ,auto-recovery after fault condition is removed.
105~135% rated output power
Protection mode :Clamp by zener diode,output short
-0℃ ~ +50℃
20%~90% RH non-considering
-20℃ ~ +85℃ 10~95% RH
10~500Hz, 2G 10min./1 cycle ,period for 60 min. each along X Y Z axes
SAFTY & EMC
Compliance to EN55024, EN61000-3-3
Compliance to EN61000-3-3
1. All parameters are specified at 230VAC input, rated load, 27℃ 70%RH ambient. 2. Ripple and noise are measured at 20MHz by using a 12 inch Twisted pair terminated with 0.1u and 47u capacitor. 3. Tolerance: includes set up tolerance, line regulation, load regulation. 4. DC voltage : the output voltage set at point measure by plug terminal &50% load. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment .The final equipment must be re-confirmed that it stills meets EMC directives.