Work station in E.P.A for ESD Floor mat or For ESD Foot Strap
the black color is normally used in E.P.A
within two weeks
10000 Piece/Pieces per Month
Packaging & Delivery
1roll/ctn, 1000*190*190mm, weight: about 30kg/ctn
Black Conductive Mats
Conductive Rubber ESD Mat EP1004
1) Conductive ground pads are made of quality conductive material and synthetic rubber.
2) Resistivity of surface and bottom layers: 103-105 ohms.
3) The black color is normally used. and the best function in E.P.A environment.
1.Permanent anti-static performance 2.Anti-fatigue for workers and promote blood cirulation as floor mat 3.Durable and Elastic 4.Meet ROHS,SGS requirement 5.Surface Resistance for dispassive mat:<107Ω or insulative surface is available 6.Surface Resistance for conductive mat <104Ω 7.Color: Black for conductive and white for dispassive
8.Size: With 1 meter* Length 10m* Thickness 2mm (other size can be customized.)
Work station in E.P.A for ESD Floor mat or For ESD Foot Strap.
How to set the Mat
Method for laying antistatic floor mat 1. Requirements on floor 1). The floor shall be the wet rubbing, ceramic or wooden floor; 2). It shall be flat, without obvious undulation, and with the roughness less than 2‰; 3). It shall be in enough strength, without sand streak or scaling. 4). The floor shall be dry. 2. Construction procedures and methods 1). Clean the floor with #120 gasoline or xylene (with cleaning machine); 2). Lay the copper bars or aluminum bars, when the copper bars are 0.02mm thick and 30mm wide, the length and number shall be subject to the actual requirements during laying, and lead one end of the copper bars to ground. 3). After laying the grounding grid, clean the dry floor, coat the conductive glue, and allow it to dry for 20 – 30 minutes until it is not sticky. Repeat the same procedures for the bottom of the antistatic floor mat (black), but coat the conductive glue once. Then bind the antistatic plastic on the floor, roll 5 times with heavy roller, to make it flat and smooth. Allow it to stay for 48 hours under normal temperature before use. 4). Construct under the ambient temperature not less than 25°C and the humidity not more than4525°C, and well ventilated. 5). Ensure the resistivity of conductive glue not more than 108Ω/cm2, and the anti-stripping strength at 2.5 Kg/cm2. 6). Coat the conductive glue or paste on the copper bar for conductivity in the gaps.
Welding: weld along the joint between the mat boards with 800-1000W plastic welding gun, and take care to avoid any omission or incomplete penetration of welding, and ensure any extension shall be made as smooth as that of the veneer board. Clean and polish the surface. Coppper bar Conductive glue PVC Soldering Stick
Simply Method for laying antistatic floor mat You also can put the mat without Copper Bar,Just put the mat with conductive glue and weld the mat by soldering stick.it's easy to put the mat if we do not use copper bar.
Packaging & Shipping
Packaging: 1 roll/ctn, ctn size:1000*190*190mm; Weight: about 30kg/ctn
Payment terms: 30% deposit by T/T first, 100% payment before shipping.
Shipping : with in two weeks , or based on your qty, Port : Shenzhen
We,Aidacom, established in 2002, rooted from a small plant in 1999, is located in Shenzhen,south of China .We are specialized in manufacturing ESD Gloves,ESD Heel/Wrist Strap,ESD Garment,ESD Chairs,ESD Sticky mat,ESD Mat and ESD Tapes. And also we are a leading distributor with 10 years experience for all ESD& Cleanroom products such as ESD Tools , ESD Packing ,Clean room Consumables,Equipments,Solsering stations and Testers.
Our customers are involved in various sectors:Micro electronics, Automotive ,Electronics, Medical, Clean Room.Our Customer base includes. LG Electronics, Flextronics, Foxconn, Panasonic,Alcatel and so on.We are identified as one of the most trustworthy suppliers of the above Product ...
FAQ 1- What is ESD?
ESD (Electrostatic Discharge) is Static electricity. This energy is found in the air surrounding us and can damage electronics components in a computer such as a Hard disk drive, Floppy Disk drive, motherboard, CPU, memory modules, etc... ESD occurs when touching an object that conducts electricity. To protect your memory module from ESD, always store components in anti-static packaging until use.
FAQ 2-. How could I apply for after-sale protections?
First, you could contact with the sales who sold the goods to you
Second, you could kindly send your pictures and attached the order PI we sent you for these goods
Third, we would discuss the problem you reply to us, and it would takes three days to give you answer.
Fourth, we would send the broken parts or products (in the warranty period)with free charge by your next order and send the tips of how to replace it.
FAQ 3- .Do conductive floor mats remove charges from personnel not wearing special footwear? Can static dissipative floor polish reduce charges generated by personnel not wearing special footwear?
In general, conductive floor mats perform best when personnel are wearing special footwear, either static control shoes or foot straps. The combination of mats and flooring with appropriate footwear creates a conductive pathway to ground to dissipate charges from the body. Most ordinary footwear is insulative, and when used with the mats or flooring, there is no conductive pathway between the body and the floor. Thus, charges on the body would not be dissipated satisfactorily.
Floor finishes tend to work differently from mats and flooring materials. They function partially by affecting the tribocharging characteristics of the interaction between flooring material and footwear. Thus, they may reduce the level of static charge generated on the body with special foot-wear. However, the actual performance can be affected by a number of factors such as humidity.