1. All cargos are packaged in one box.
2. Every shipping ,we will package with bubble to wrap valuables, then put into cartons.
3.We support for environmental protection, each carton is reusable.
1 - 500
To be negotiated
Anti-static 12V (110V-220V) Portable Soldering Station adjustable temperature control Electric Soldering Iron 15030
Full Set: Host, Power Supply DC12V(AC110V-220V),Handle is Japanese white soldering iron head;
Lithium battery pack: 12V 3600ma.
It is suitable for taking it outside to work.
It can charge to full in two hours with AC110V-220V, which will stop charging automatically when fully charged. After that,it can work 3-4 hours outside.It can be charged by car with 12V or charged by DC12V.
This product can heat up quickly to 450 degree, which has precise temperature display in LED screen.
Main functions and features:
1.Temperature control range:150~480℃
2.Automatic compensation range of Thermocouple cold junction is -9-99℃(need to be accurate).
3.PID temperature control,temperature stabilization(when under no lead)
4.It can save 5 groups of temperature.
5.It can keep the temperature calibration parameters of every tip seperately, support all types iron head of T12, and it has 6 customized iron heads, which also can shield uncommon heads.
6.Automatic standby(1-60min can be set)
7.Automatic sleep mode(1-60min can be set)
1.Normally, the clockwise rotation is less than 3 grids in 1 second, and it enters standby (default 200 degrees (150-300 degrees configurable) state). If the set temperature is lower than 200 degrees, it will go to sleep directly.
1.1In the standby, continuously rotate clockwise 3 grids (soft shutdown) in 1 second, and in the sleep (soft shutdown) state, press the encoder to enter the working state.
1.2In the standby, press the encoder or rotate counterclockwise to resume working.
Go to the previous menu.
2.Normally, the counterclockwise rotation is 3 grids in 1 second, and the power is increased. The current temperature is +50 degrees (10-200 degrees configurable). After 5 minutes (1 to 60 minutes can be set), it can automatically reply. Also can operate the encoder to recover in advance.
3.Normally,short press to enter the temperature setting state.
3.1In the temperature setting, the temperature of the current setting group can be adjusted by rotating the encoder. The default step is 5 degrees (steps 1-50 can be set).
3.2In the temperature setting,switch the setting group by holding down the rotary encoder and rotating
3.3In the temperature setting, short press the encoder to save and exit to normal status.
4.Normally,Pressing the encoder and rotating it counterclockwise can enter the head change interface. Under this interface, the output is turned off, and the head change operation can be performed with power. You can switch the header type. And call the correction curve of the relevant header.
5.Normally, press the encoder and rotate clockwise to enter the temperature comparison interface, you can compare the parameters of the current tip, you can also restore the default correction parameters. Before entering the correction wizard, you need to restore the default correction parameters.
6.Normally,press and hold the encoder for 2 seconds to open the setup menu
7.All settings interface and menu, long press the encoder for 2 seconds to exit without saving
In normal pattern, spin encoder to adjust temperature;
In normal pattern, clickencoder to access to Strengthened Model(450 degree);
In normal pattern,stand still for 3 minutes goes into a sleep mode, which can help you use it longer. And you can enter into menu to set time.
In normal pattern,long press 3 seconds to enter into setting.
Setting menu details:
1.Solder tip choice
2.Dormant time setting
3.Dormant temperature setting
4.Timed shutdown setting
5.Timed shutdown mode
6.nactivity Delay off screen
8.Alert sound setting
9.Manual temperature compensation
10.Temperature supplyment coefficient setting
11.50 degree correction
12.100 degree correction
13.200 degree correction
14.300 degree correction
15.400 degree correction
16.Restore default values
17.Language setting(Simplified Chinese,English)
20.Sensitiveness to shock
21.Power source and Voltage correction
22.Maximum Temperature setting
23.The lower voltage setting
27.Screen protection setting
28.Doule-click the button
29.Click the button
Shenzhen Hua Shi Locksmith House
104, Building 6, Hualian Huayuan Apartment,Nanshan Dist.,Shenzhen,
Reply: It is our pleasure to receive your any inquires, and we will reply to your details within 24 hours.
Language: We are well-trained and professional sales staff who can speak fluent languages, such as Chinese(Mandarin,Cantonese),Japanese, Korean and Russian.
Working hours: Monday-Saturday 9am-6pm(Except Chinese public holidays).
After-sale service:We are committed to the provide you satisfactory pre-sales and after-sales customer services and quickly reply to our customers’ questions.
If you’re satisfied with our products and our services, please kindly give us five stars feedback. It’ll help more people to know our products. Kindly feel free to let me know if you have any concern or confusion about our products, I will make the utmost effort to help you. Thank you very much.
Q :How to order?
A:You can place order on our Alibaba store or AliExpress store,moreover you also can beone of our members on our office website,after that you will be informed the latest products or some promotional activities and get our professional technical support.
Q:Do you provide wholesales?
A:Yes,we always sell our products both to retails and wholesales,please don’t hesitate to contact us to get the wholesales prices.
Q:How about your products quality? A:We always try our best to providethe best products to our customers and best after-sale service in this field. And we will check and test every products before shipping. We also need your advice to improve ourselves, please sendus your feedback,thank you so much.