notice Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order. close

Automatic Cutting Machine Automatic 2mm pcb separator

  • 1-4 Pieces
  • >=5 Pieces
- + Pieces available
0piecesselected, US $in total
View Details
Shipping fee:
Depends on the order quantity.
Lead Time:
30 day(s) after payment received
Contact Supplier
Report Suspicious Activity
Quick Details
Place of Origin:
Guangdong, China
Brand Name:
Model Number:
Product name:
2m pcb separator
Power supply:
Cutting thickness:
Max length:
Cutting PCB:
Aluminum, fiber PCB
Machine size:
Cutting speed:
80, 120, 200, 300mm/s
Plate installed size:

Packaging & Delivery

Selling Units:
Single item
Single package size: 
270X50X30 cm
Single gross weight:
42.000 kg
Lead Time :
Quantity(Pieces) 1 - 1 >1
Est. Time(days) 30 To be negotiated

Automatic Cutting Machine Automatic 2mm pcb separator

2m pcb separator

Product features: fast split board, no burr, no deformation. After dividing the board, it can be reconnected with the original board, no gap!
1. cutter machine adopts unique cutting method, cutting the circuit board composed of six blades, on the two as a group, to form a cutting unit. They are A, B, C, three groups. The cutting process is divided into three stages, the first cutting blade group A circuit board 40%, too then run again from the A B blade knife through the slot, once again completed 40% of the volume cutting, and finally by the C group of the last 20% blade cutting and finishing, because each cutting amount is very small, so the cutting process should have a more traditional way off force decreased by more than 80%, segmentation the edge of the circuit board smooth smooth, the surface is very smooth, not twisted. Alice is currently on the market can not guarantee the cutting of aluminum after deformation of the machine.
2, because of many times of cutting, the cutting process is very stable, greatly improving the positioning ability of the V-CUT slot. Even if the V-CUT slot is very shallow, there will be no V-CUT slot jumping out of the guide knife, avoiding the bad.
3, all cutting blades are calibrated by an excitation dual frequency laser interferometer, ensuring that the rear knives can continue to cut accurately in the groove cut through the rake. The tool tip runout is no more than 0.02mm., ensuring the perfect cutting quality.

Power SupplyAC 220V, 50Hz, 40W
Applicable materialAluminum PCB, fiber PCB
Max cutting lenth200-1500mm
Cutting thickness0.5-2mm
Cutting speed80, 120, 200, 300mm/s
Working temperature10~35℃
Machine size830*400*240mm
Plate installed size2600*400*240mm
Blade materialJapan SKH7 HSS
Blade bearingJapan SKD-11
MotorZD.5GN-20K, 51K 60RGN-CF


Product main features:

1. The platform USES the Japanese panasonic servo motor, imported orbit, ensure the stability and control precision of mobile platform.
2. The X, Y axis adopt panasonic servo drive, with imported linear guide, ensure the patch of high precision, high speed, the stability of the first-class.
3. 4 sets high speed post opening work at the same time, greatly improve the equipment performance. Under the suction head adopt the imported guide rail, high precision and long durability.
4. Easy to understand way of graphical programming, greatly improve the convenience of operation, automatic visual auxiliary positioning positioning, accurate, convenient.
5. The selection of a variety of batcher, can satisfy the requirement of different LED packaging components of SMT.
6. Controlled by industrial control computer + independent special controller, system stability, simple operation, easy to learn.
7. Powerful software, programming coordinates using numerical and graphical display, coordinate correction and change is convenient, the production process of graphical display patch progress and components, subsidy is convenient.
8. The software USES the database system, different types of PCB programming can be stored, convenient call, a programming of new products, calling for life.
9. The platform, the Y axis, the X axis can be manually move, free movement speed adjustment, realize arbitrary point can manually to arrive, convenient programming.
10. Imported negative pressure detection system, to accurate detection of absorption material, effectively prevent leakage of material, extractor.
11. A negative pressure generator with built-in, low noise, long service life, vacuum pressure constant.
12. The standard configuration: 1 set of industrial control computer, opening four groups, suction nozzle 12;
13. Optional: matchs outside to 8 mm, 12 mm, 16 mm and 24 mm yamaha feeder; Air compressor.


Technical parameters:

Machine Model


The biggest circuit board area


Maximum moving range

X axis 1220mm, Y axis 430mm

Z axis Maximum moving range


Typical patch speed


Typical LED lens patch speed


The theory of maximum patch speed


positionaI accuracy


Location way

Mark point camera + Visual camera positioning 

Components can be placed

0603 above to 7272 resistors and capacitors, and all kinds of 0603 and 3528, 5050, 5630, 5730, meet placement of SOP SOT chip, and compatible with all kinds of high-power chip SMD componets, LED lens placement

Programm method

Computer graphical programming + visual camera positioning

Feeder applicable

8mm, 12mm, 16mm and 24 belt type feeder, or vibration plate

Number of feeder

Standard placed 18pcs feeders of 8mm or 12mm, or 2pcs 4 channels vibration plate


JUKI nozzle 504, 505 and 506


LED fluorescent tube, soft light belt, power drive, guardrail tube, module, display and other LED applications

operating system


negative pressure

An external air source 0.55MPA

Power and rate

220V, 50Hz, 1.2KW





1, Mount: Mount 0603 to 7272 can meet all specifications of SMD LED components. In addition to all the planar LED plane, other electronic components (such as resistors, capacitors) and high power LED and the lens can be produced.
2, precise positioning: positioning block is the most convenient way to position the substrate, the origin of counterpoint, accurate positioning (accuracy less than 0.05mm). Mount angle range of 0-360 degrees, the accuracy of 0.1 degrees. Each suction nozzle is independent of angle, and six element recognition cameras, in addition to LED lamp can mount the traditional., bulb lamp, lamp, lamp, ceiling lamp, guardrail tube, LED drive power, copper lamp series and so on can be freely mounted.
3, high precision: X, Y, W axis are equipped with precision ball screw and guide rail, Z axis 6 sets of imported motor drive, enhance the smooth coordination of equipment movement, reduce abnormal noise, greatly improve the accuracy and speed of the patch.
4, SMT specifications: platform 1200X310mm, applicable to the current market of 99% LED products;PCB board can be affixed to various shapes, without clamps, can be affixed 1.2-1.5 meters long PCB board.
5, the visual system, visual programming software online programming, which is of high precision digital camera camera, there is no need to manually input elements and positioning coordinates; using visual camera automatic identification, to ensure the accuracy of mount.
6, the software interface is simple and elegant, functional and practical, visual software online programming, display all coordinates in the imposition software, and fine-tuning of the coordinates of the point, in order to achieve high precision mount, without manual input element coordinates, fast and convenient, simple and clear, combined with the actual needs of many LED manufacturers R & D design.
7, YAMAHA Feeder: machine configuration 6pcs 8MM YAMAHA Feida (also optional with Fuji electric Feida), long service life, high stability, fast speed.


Shenzhen Wanbo Hi-tech Co Ltd is specializing in manufacturing TAB bonding machine, ACF bonding machine, LCD screen laser repair machine, soldering station, soldering tips, digital multimeter, adjustable dc power supply, programming electronic load, LCR meter, oscilloscope, lamp mafnifier, smt machine, pick and place machine, reflow oven, solder paste, miscroscope, ultrasonic cleaner, ultrasonic welding machine, assembly line, LED chip packaging machines etc. We have R&D team based in Shenzhen. Our goal is to build perfect world.



1. Can you do OEM?
Yes. Also can be customized according to the customer's specific requirements.


2. If 110V is available?
Yes. 110V and 220V can be switched arbitrarily.


3. What kind of plug does your product equip with?
American or Australian or European or UK plug or other types of plug.